23 January 2026 in IEEE Sensors Journal
A high-sensitivity optical fiber hydrogen sensor based on Pt/WO₃ nanoparticles has been fabricated and also characterized. To create the sensor, a metal film was first deposited on the surface of a Fiber Bragg Grating (FBG) by using an electroplating method and this film was then covered with a layer of Glass Fiber (GF). Subsequently, a Pt/WO₃ nano-hydrogen sensitive material was coated on the surface of metal film and the GF. Scanning electron microscopy (SEM) characterization of the device used to inspect the surface revealed that the nanoscale Pt/WO₃ material forms an irregularly stacked porous morphology. This loose and porous structure provides abundant active sites for hydrogen absorption, thereby facilitating rapid response of the sensor to the hydrogen gas present. The sensing performance was evaluated using a custom-built experimental system. Results obtained demonstrate that the sensor developed exhibited a sensitivity of 0.225 pm/ppm within the hydrogen concentration range of 0–9960 ppm, with a lowest detection limit of 13.2 ppm seen. Excellent linearity and a strong capability to deal with extraneous effects were also observed. In tests carried out, the sensors were shown to be capable of dealing well with external temperature changes and vibration tests conducted (on an SA-JZ010 vibration table) under conditions of vibration/acceleration at 50 m/s² at 10 Hz and 150 Hz confirmed its outstanding stability.