In this study, a sustainable method employing concentrated sunlight to achieve environmental remediation of wastewater, contaminated by Ciprofloxacin antibiotic (CIP), is thoroughly investigated. A green ZnO/g-C3N4 nanocomposite (NC) is used as a photocatalyst coating on glass to investigate the inactivation of CIP in water, in a flow-reactor configuration at small-prototype scale (10 liters/h, catalyst area 187.5 cm2). ZnO/g-C3N4 NC coatings were obtained by an in-situ thermal condensation process coupled with a green synthesis protocol and deposited on glass, via a simple drop casting method. Morphological and structural analyses of synthesized composites were performed with Fourier-Transform Infrared (FTIR) Spectroscopy, Scanning Electron Microscopy (SEM), Energy-Dispersive X-ray (EDX) and X-ray diffraction (XRD) techniques, while optical properties were studied with Diffuse Reflectance Spectroscopy (DRS). The degradation of CIP was first tested at a lab scale under simulated sunlight and then studied under sunlight in a parabolic trough concentrator (PTC). Suitable degradation of CIP (100%) was observed at 210 min via High-Performance Liquid Chromatography (HPLC) and the by-products were determined by Liquid Chromatography-Mass Spectroscopy (LC-MS). Microbiological tests revealed the absence of antibacterial activity in CIP water treated with ZnO/g-C3N4 NC photocatalyst against Staphylococcus aureus, Pseudomonas aeruginosa, and Priestia megaterium. Our results directly demonstrate the effective inactivation of CIP with a process designed for sustainability both in terms of energy input (solar) and scalability of materials. Also, the small-prototype scale of this investigation provides insights into the challenges arising from the perspective scale-up to an industrial application, aimed at antibiotics inactivation in wastewater and thus helping to prevent the spread of antimicrobial resistance (AMR).
1 November 2023 in Journal of the Electrochemical Society
In this work, commercial porous carbon electrodes viz., Graphite Felt (GF), Carbon Felt (CF), and Carbon Cloth (CC) were modified by graphitic carbon nitride (g-C 3 N 4 ). In the process, g-C 3 N 4 was in situ synthesized via thermal condensation of melamine over carbon electrodes. The structure, morphology, composition and electrochemical properties of the carbon electrodes were analysed. Electrochemical investigation revealed improved performance for g-C 3 N 4 modified electrodes as decreased overpotentials in water splitting configuration. The electrochemical active area evaluation allows to attribute the enhanced performance to catalytic activity of g-C 3 N 4 on carbon electrodes rather than increased surface-to-volume ratio. Overall, in situ synthesized g-C 3 N 4 is proved to be a promising material for tuning the electrochemical activity of the porous carbon electrodes through an easy and potentially scalable process towards electrochemical energy storage systems.