Alla S. Smolyanichenko

Alla S. Smolyanichenko

Auto-generated profile, based on publicly available information

Alla S. Smolyanichenko

Don State Technical University

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 May 2024 in Construction Materials and Products
Verified
Journal Article
Closed access
Evgenii M. Shcherban'Evgenii M. Shcherban'
Evgenii M. Shcherban'
SSS. A. Stel’mAkh
S. A. Stel’mAkh
LML.R. Mailyan
L.R. Mailyan
Alexey BeskopylnyAlexey Beskopylny
Alexey Beskopylny
ASA.S. Smolyanichenko
A.S. Smolyanichenko
NBN.A. Beskopylny
N.A. Beskopylny
The lack of systematic information on the influence of the combined modification of variatropic concrete on their characteristics was revealed. The purpose of this work was to study the influence of the type of modifying additive, namely micro-silica, nano silica and their combination on the properties of concrete made using three different technologies - vibration (VC), centrifugation (CC) and vibration centrifugation (VCC). Concrete elements made using centrifugal compaction technology were subjected to additional sawing. Three types of modifiers were studied: micro-silica (MS), nano silica (NS) and their combinations. To determine the degree of effectiveness of each recipe solution, the following main characteristics were monitored: workability of concrete mixtures; density of hardened composites; compressive strength (CS) and water absorption (WA). When modifying MS, the greatest effect for VC, CC and VCC was observed with its amount of 8% instead of part of the cement. CS gains were up to 17% for VCC, and WA decreased to 25% for VCC. The NS modification showed the greatest effectiveness at a dosage of 4%. CS gains were up to 19% and WA decreased to 28% for VCC. A combined modifier of 75% MS and 25% NS showed the greatest effectiveness. CS increased up to 17% compared to effective dosages of single-component modifiers. The effectiveness of VCC, characterized by the percentage increase in CS, was up to 55% higher in comparison with VC and up to 25% higher in comparison with CC. WA of concrete decreased to 14% in comparison with effective dosages of one-component modifiers. The effectiveness of VCC, characterized by the percentage reduction in WA, was up to 30% higher compared to VC and up to 12% higher compared to CC. The greatest efficiency of all types of modifiers was observed in combination with the synthesized vibration centrifugation technology.

1 December 2019 in IOP Conference Series: Materials Science and Engineering
Verified
Conference Paper
Open access
ASA S Smolyanichenko
A S Smolyanichenko
AKA S Khalil
A S Khalil
The presented article refers to studies that examined the catalytic properties of black sand (AR Egypt) for its further use in water purification in fishery complexes. Also, black sand was used as a filter material in a radial filter model. According to experimental data, the stated hypotheses were confirmed.

25 December 2022 in Siberian Journal of Life Sciences and Agriculture
Verified
Journal Article
Open access
PDF file
ASAlla S. Smolyanichenko
Alla S. Smolyanichenko
EYElena V. Yakovleva
Elena V. Yakovleva
Сточные воды от различных промышленных производств представляют наиболее сложную задачу для проектировщика в области разработки эффективной схемы очистки, поскольку их состав и свойства крайне разнообразны, а методы очистки возможны как химические и физико-химические, так и биологические. Для подбора наиболее действенного метода очистки конкретного вида сточных вод, необходимо установить, в каких фазово-дисперсных состояниях находятся примеси. Авторами в данной статье дополнена существующая классификация фазово-дисперсных состояний загрязнений в сточных водах переходными состояниями: ультравзвешенное, постколлоидное и атомарно растворенное. Для одновременного выделения загрязнений, находящихся в нескольких группах состояний по приведённой классификации, разработан фазовый сепаратор дисперсий, включающий в себя несколько последовательно расположенных зон очистки и заменяющий крупногабаритные и дорогостоящие сооружения. На разработанной установке проведено компьютерное моделирование в программе ANSYS с целью получения линий тока и давления движения потока жидкости, векторы скоростей в формате 3д с их значениями, а также определен коэффициент полезного использования установки. Для наиболее оперативной оценки процесса очистки сточных вод в фазовом сепараторе разработана автоматизированная система управления в программе Овен. Подобраны запорная и регулировочная арматура, установлены контрольно-измерительные приборы, позволяющие оператору осуществлять поэтапный контроль по основным видам загрязнений. С целью проверки эффективности сепаратора дисперсий проведены эксперименты на сточных водах разных составов от нескольких промышленных производств. Полученные результаты позволяют рекомендовать фазовый сепаратор в качестве сооружения предварительной очистки сточных вод на ряд промышленных предприятий.

18 August 2021 in Materials Science Forum
Verified
Journal Article
Closed access
PDF file
AKAleksandr Khalyushev
Aleksandr Khalyushev
Sergey A. Stel'makhSergey A. Stel'makh
Sergey A. Stel'makh
Evgenii M. Shcherban'Evgenii M. Shcherban'
Evgenii M. Shcherban'
ASAlla Smolyanichenko
Alla Smolyanichenko
AKAleksandr Korobkin
Aleksandr Korobkin
The aim of the work is to study the microfiller effect on the granulometric composition of the modified cement. A scanning electron microscope RМ-106 I was used for microscopic analysis. The survey was carried out in reflected electrons. The chemical analysis of the materials’ structure was investigated by energy dispersive spectroscopy (EDS). The distribution of particles of mineral components was evaluated with a Microsizer 201C laser particle analyzer with a range from 0.2 to 600 μm. Microscopic analysis of the samples of microsilica MK-85 shows that all particles are spherical with an average grain size of about 5 microns and consist of amorphous glass with a different set of particle fractions. The results of X-ray phase analysis of condensed microsilica grade MK-85 show that it consists mainly of silicon dioxide in an amorphous form. The introduction of mineral additives with a high specific surface in the composite Portland cements composition in an amount of more than 5% is not rational without the use of superplasticizers, since the water demand increases sharply, which reduces the cement stone strength. The introduction of a microfiller provides an increase in the compressive strength of a cement stone at the age of 28 days of normal hardening by an average of 37%.

1 November 2023 in Siberian Journal of Life Sciences and Agriculture
Verified
Journal Article
Open access
PDF file
ASAlla S. Smolyanichenko
Alla S. Smolyanichenko
АХАлександр Халюшев
Александр Халюшев
EYElena V. Yakovleva
Elena V. Yakovleva
Contaminated mine water with a large amount of salts makes underground and surface water sources unsuitable for household and drinking needs. Already in 2016, there was a shortage of drinking water in the Rostov region. Water from surface sources does not meet the hygienic requirements for chemical parameters in 36.1% of the samples taken. Water from underground sources in terms of color, turbidity, total hardness, dry residue, content of iron ions, manganese, hydrogen sulfide, nitrates, ammonia, chlorides, sulfates, magnesium, sodium did not meet the required standards in 72.2% of cases. Due to the need for huge expenses for the purification of highly mineralized waters and the poor development of cheap technologies for the neutralization of large volumes, attempts to purify discharged or flowing mine waters to a safe level turn out to be practically fruitless. In this article, studies were carried out to reduce the concentration of dissolved ions of heavy metals (iron, manganese, copper and zinc) in mine wastewater by sorption in a static mode (charring) using rice husk biochar with electromagnetic treatment. The authors proposed a method for pre-treatment of the sorbent from rice husk biochar in an electromagnetic field at a process activation unit. The results of laboratory tests confirmed the high efficiency of the sorbent for the removal of heavy metal ions from mine waters. On the basis of the results obtained, optimization of the sorption purification of mine waters in the mode of carbonization was carried out using the method of mathematical planning of the experiment (full factorial experiment FFE 2k). The factors most influencing the efficiency of mine wastewater treatment from iron and zinc ions have been identified. With a probability of 0.95, the proposed models are adequate, and they can be used to describe the sorption process when using the studied sorbent to remove heavy metal ions (iron, zinc, etc.), while the optimal concentration of the sorbent from rice husks is within 0.5 mg/l. With an increase and decrease in the concentration of the sorbent above the optimal values, the efficiency of sorption decreases, and this affects the iron to a greater extent. In general, the obtained sorbent has a chemical composition similar to that of activated carbon (the most widely used sorbent for water purification), but at the same time it is a cheap production waste, which confirms its efficiency, both technological and economic, when used to purify natural and waste water. With the introduction of the proposed treatment scheme for mine water treatment facilities, it is expected that the concentrations of dissolved heavy metal ions, in particular, iron, zinc, manganese, will decrease to the concentration of the discharge into the reservoir.

19 April 2024 in Powder Metallurgy аnd Functional Coatings
Verified
Journal Article
Open access
PDF file
ASA. S. Smolyanichenko
A. S. Smolyanichenko
EYE. V. Yakovleva
E. V. Yakovleva
Mining wastewater, characterized by elevated salt levels, necessitates effective treatment to prevent contamination of underground and surface water. Traditional methods for treating large volumes of mining wastewater with high total dissolved solids are expensive, and cost-effective alternatives are limited. In this study, we propose a solution to this challenge: the sorption of dissolved substances using a carbonaceous sorbent derived from waste, specifically rice husk biochar. To enhance the sorbent’s efficiency, we subjected it to electromagnetic activation, resulting in increased carbon content (from 43.3 to 78.5 % compared to the initial biochar), reduced impurities, and particle size reduction to the nanoscale (1–50 nm) with the formation of mesopores (mean diameter from the adsorption isotherm is 167 Å) and micropores (4.92 Å). This process contributes to improved compositional homogeneity. The effectiveness of the proposed sorbent was validated through the treatment of wastewater from Kirov Mine (Novoshakhtinsk, Rostov Region) under laboratory conditions. The removal rates for dissolved heavy metal ions (iron, zinc, manganese) were found to be 89, 84 and 26 %, respectively. A recommended two-stage sorption treatment involves: (1) static sorption using electromagnetically treated rice husk biochar at a concentration of 0.5 g/dm3; (2) subsequent reagent treatment of the suspension (SKiF-180 reagent, 1.0 mg/dm3), addition of potassium permanganate for manganese removal, settling for 30 min, and non-pressure filtration with a rice husk biochar filter.