The outer rotor permanent magnet alternator (PMA) is superior for small wind turbine system due to its robust, little maintenance and low cost configuration. In this research, the design and performance analysis of a radial flux outer rotor type PMA used for gearless, extremely low-speed, and small capacity wind turbine system has been discussed. The design has been simulated to analyze this PMA. The elementary configuration like material types, magnet types and additional electrical and mechanical parameters are studied, and the performances parameters of PMA are improved by changing these elementary electrical and mechanical parameters or some other related factors such as reducing the cogging effect. Cogging torque has been reduced by employing fractional slot per pole, width of slot opening, mounting of the magnets. Also the slot shape has been custom-made to increase the efficiency. The slot fill factor was improved by using different wire diameter used as winding coil. This improvement has been played a great role to reduce copper losses thereby improving the thermal condition of the slot. Finite element analysis (FEA) method was used to analyze this PMA in order to test the real time performance simulation with loss and cogging torque calculation. By taking all these considerations into account, higher efficiency from the outer rotor arrangement with minimum losses has been achieved.
The outer rotor permanent magnet alternator is unrivaled for low-speed wind turbine frameworks because of it's robust structure, low maintenance and construction cost while the inner rotor permanent magnet alternators are most economically accessible for its customary auxiliary setup. In this research, a comparative study of design and performance analysis between an inner rotor PMA and an outer rotor PMA used for low-speed and small capacity wind turbine system has been overviewed using simulation. The basic setup like materials, magnets and some electrical and mechanical parameters are concentrated on, and the performance parameters of PMAs are observed by changing these rudimentary electromechanical parameters. By considering all of these contemplations, higher productivity from the outer rotor PMA with higher efficiency has been accomplished compared to that of inner rotor PAMs for low-speed wind turbine system.
The outer rotor radial flux permanent magnet alternator (PMA) is more suitable for low-speed applications than axial flux or inner rotor radial flux PMA. With the reduction of rotational speed the cogging torque and ripple torque magnitude increases significantly which is known as pulsating torque. The increment of these torque factors superimpose on generated torque thereby degrading the quality of the output power. This superimposed torque increases body vibration and creates extra noise. This paper examines the impact of these torques especially the cogging torque, and extracts it from the actual torque to minimize its impacts on the performance of the machine. By using analytical method, total cogging torque has been derived and correlated from the cogging torque by Fourier series expression of a single stator slot. Some factors or parameters like fractional slotting, cogging torque goodness factor have been considered, examined and modified by using these derived expressions which are directly involved in cogging torque manipulation to minimize the cogging torque from an extremely low-speed outer rotor PMA arrangement to improve the performance and stability of the machine. The design aspects of the PMA have been examined using finite element method (FEA) for its higher accuracy.
Implementation of wind turbines has been increased significantly because of its availability, easy and low cost generation around the world. Meanwhile in Bangladesh wind energy conversion is a very recent concept compared to other renewable energy conversion techniques and yet in many places research is going on to measure and analysis the wind velocity. The primary target of this research is to determine the wind prospects of Teknaf coastal area in Bangladesh by developing a statistical analysis of wind velocity at that region and to propose the design of blades for a low-speed wind turbine using theoretical analysis of power availability and wind velocity at different heights. The design approach can be applied successfully to develop a low-speed wind turbine's pole and blade construction.
The in-runner permanent magnet alternator (PMA) is adequately utilized as a part of wind power generation system specially for its robust and conventional structural configuration. In this research, the execution investigation of an in-runner outspread flux PMA intended for direct driven, extremely low-speed and small capacity wind power system has been examined with numerous modification shave taken into account e.g. changing some mechanical parameters such as use of effective and robust material, fractional slotting per pole, improving the slot fill factor and mounting of the magnets for reduction of cogging torque. The proposed configuration has been analyzed by finite element analysis (FEA) technique keeping in mind the end goal to observe the real time performance with several loss counting and cogging torque calculation. A good slot fill factor improves the thermal condition in the slot of the stator by reducing the copper losses. Considering all the point, an in-runner radial flux permanent magnet alternator (RFPMA) has been achieved with minimum losses and higher efficiency.
In this paper, the design and analysis of a modified outer rotor PMA has been presented, which increases the efficiency and machine capacity by minimizing the cogging torque. The modified outer rotor type PMA will be suitable for extremely low-speed wind turbine based power generation system. The performances of the machine are analyzed by simulation using ANSOFT MAXWEL software, and the results are compared with the typical PMA model. All the performances are examined using finite element analysis (FEA) method to get higher accuracy in simulation stage.