6 September 2024 in IEEE Robotics and Automation Letters
Motion planning for autonomous active perception in cluttered environments remains a challenging problem, requiring real-time solutions that both maximize safety and achieve a desired behavior. In dynamic underwater environments, such as in aquaculture operations, the robots are additionally expected to deal with state and motion uncertainty and errors, dynamic and deformable obstacles, currents, and disturbances. Previous work has introduced real-time frameworks that provided safe navigation in cluttered environments, active perception in static environments, and robust navigation in uncertain dynamic environments. This letter introduces a new real-time approach called ResiVis, which leverages the best aspects of the aforementioned techniques along with a new formulation that further enhances underwater autonomy by enabling active perception of static and dynamic target objects from desired distances. The proposed method utilizes path-optimization for real-time response with constraints guaranteeing continuous collision safety, and computes paths with clearance adaptive to both the conditions of the environments and the performance of the path follower. An improved new constraint encourages observations of dynamic objects with the planner adapting to satisfy desired observation distances and their projected future positions. ResiVis is validated with challenging simulation experiments and with hardware-in-the-loop trials in real industrial-scale aquaculture facilities.
1 January 2019 in IFAC-PapersOnLine
1 January 2020 in IFAC-PapersOnLine
Traditional extrusion based additive manufacturing (AM) is realized using a 3 degrees of freedom (DOF), translation only, 3D printer. It then follows that the printer must be larger than the printed part. One way of enabling AM on a larger scale is to combine AM with robotics. By using a 6 DOF robot manipulator to extrude a fast-curing material, the workspace of the build would be greatly expanded. In addition, since the structures would no longer have to be built with the bottom-up or top-down approach which is necessary for most existing forms of AM, the flexibility of the building process would also increase. This could possibly reduce the need for support structures to the point of only relying of anchoring and stabilizing. In this paper, a method for generating a path for AM using robot manipulators that takes advantage of the robot’s DOF is presented. The path is generated based on simple surfaces in CAD models. First, the surface is sampled and the samples are gathered in a point cloud. Then, a path is generated based on the point cloud. Three different approaches for generating a path are tested where the weighted greedy choice algorithm gave the most promising result. With this algorithm, printing along curved surfaces and in nonlinear paths are enabled.