National and Local Joint Engineering Research Center for High‐efficiency Display and Lighting Technology Key Lab for Special Functional Materials of Ministry of Education and School of Nanoscience and Materials Engineering Henan University Kaifeng 475004 China
Auto-generated profile, based on publicly available information
Ke Cheng
National and Local Joint Engineering Research Center for High‐efficiency Display and Lighting Technology Key Lab for Special Functional Materials of Ministry of Education and School of Nanoscience and Materials Engineering Henan University Kaifeng 475004 China
Since the photoelectric response and charge carriers transport can be influenced greatly by the density and spacing of the ZnO nanorod arrays, controlling of these geometric parameters precisely is highly desirable but rather challenging in practice. Here, we fabricated patterned ZnO nanorod arrays with different densities and spacing distances on silicon (Si) substrate by electron beam lithography (EBL) method combined with the subsequent hydrothermal reaction process. By using the EBL method, patterned ZnO seed layers with different areas and spacing distances were obtained firstly. ZnO nanorod arrays with different densities and various morphologies were obtained by the subsequent hydrothermal growth process. The combination of EBL and hydrothermal growth process was very attractive and could make us control the geometric parameters of ZnO nanorod arrays expediently. Finally, the vertical transport properties of the patterned ZnO nanorod arrays were investigated through the microprobe station equipment, and the I-V measurement results indicated that the back-to-back Schottky contacts with different barrier heights were formed in dark conditions. Under UV light illumination, the patterned ZnO nanorod arrays showed a high UV light sensitivity, and the response ratio was about 104. The controllable fabrication of patterned ZnO nanorod arrays and understanding their photoelectric transport properties were helpful to improve the performance of nanodevices based on them.
A single SnO2 nanobelt was assembled on a pair of Au electrodes by electric-field assembly method. The electronic transport property of single SnO2 nanobelt was studied by conductive atomic force microscopy (C-AFM). Back-to-back Schottky barrier-type junctions were created between AFM tip/SnO2 nanobelt/Au electrode which can be concluded from the I-V curve. The current images of single SnO2 nanobelt nanodevices were also studied by C-AFM techniques, which showed stripes patterns on the nanobelt surface. The current images of the nanobelt devices correlate the microscopy with separate transport properties measurement together.
The poor efficiency and stability of blue quantum dot light‐emitting diodes (QLED) hinder its practical applications in full‐color displays. Insufficient hole injection and excessive surface defects in quantum dots (QD) layer remain the primary challenges limiting the performance of blue devices. Herein, a dual interface modification strategy is proposed to enhance the performance of blue QLED by synergistically regulating both the electronic transport layer (ETL)/QD and hole transport layer (HTL) HTL/QD interfaces. At the HTL/QD interface, the introduction of guanidine sulfamate (GAS) ligands passivates QD surface defects while reducing the hole injection barrier, thereby improving hole injection efficiency in the low‐bias region. Meanwhile, at the QD/ETL interface, Guanidine chloride (GACl) ligands are incorporated to passivate interfacial defects, suppress leakage current, and suppress excessive electron injection, thus enhancing hole transport efficiency within the QDs layer. The synergistic effect of bilateral GA‐based ligands can simultaneously enhance the hole injection efficiency based upon improving the hole transport efficiency, significantly increasing the radiative recombination ratio during device operation. As a result, the dual‐ligand modified blue QLEDs achieve a remarkable improvement in external quantum efficiency (EQE) from 16.6% to 24.3%, and a sevenfold enhancement in operational lifetime.
A symmetrical bifacial flexible Cu2ZnSnSe4 (CZTSe) solar cells are fabricated through a green electrodeposition process with championed efficiencies for both sides.