Today’s consumer electronics, such as cell phones, tablets and other portable electronic devices, are typically made of non-renewable, non-biodegradable, and sometimes potentially toxic (for example, gallium arsenide) materials. These consumer electronics are frequently upgraded or discarded, leading to serious environmental contamination. Thus, electronic systems consisting of renewable and biodegradable materials and minimal amount of potentially toxic materials are desirable. Here we report high-performance flexible microwave and digital electronics that consume the smallest amount of potentially toxic materials on biobased, biodegradable and flexible cellulose nanofibril papers. Furthermore, we demonstrate gallium arsenide microwave devices, the consumer wireless workhorse, in a transferrable thin-film form. Successful fabrication of key electrical components on the flexible cellulose nanofibril paper with comparable performance to their rigid counterparts and clear demonstration of fungal biodegradation of the cellulose-nanofibril-based electronics suggest that it is feasible to fabricate high-performance flexible electronics using ecofriendly materials.
A novel polydimethylsiloxane (PDMS)/cellulose nanocrystal flake (CNCF) composite triboelectric nanogenerator (CTG) using CNCFs as effective dielectrics exhibited a 10-times-enhanced triboelectric performance compared with its pure PDMS counterpart. Positive charges generated on the surface of the CNCFs during cyclic compression boosted electron transfer and induced extra charges. The CTG exhibited an instantaneous output power (density) of 1.65 mW (0.76 mW cm−2) under continuous operation.
9 November 2020 in Advanced Materials Technologies
Microwave electronics have evolved from bulky waveguide and vacuum tube‐based format to smaller and lighter board‐based electronics, and then to the highly miniaturized, chip‐based solid‐state form. Spurred by the advent of high‐performance flexible inorganic single‐crystalline semiconductors, a new opportunity of technology evolution from rigid microwave electronics to flexible and/or stretchable microwave electronics has emerged. The new forms of microwave electronics are expected to provide novel functions to be achieved with advanced materials, device, and system design considerations and innovative fabrication methods. Over the last years, some microwave components, modules, and systems with operation frequency greater than or equal to 1 GHz in the flexible/stretchable form factors are demonstrated. These demonstrations have alluded to the prospects of the new stage of microwave electronics evolution. Herein, a comprehensive review of the microwave/flexible microwave electronics that are demonstrated up to date is provided. An introduction to the need of flexible/stretchable microwave electronics emphasizes the motivation and potential influences of this new growing field. This review also highlights important developments in transistors, diodes, various passives, antennas, circuits, and system demonstrations, all in flexible or stretchable forms. Finally, an outlook for specific technical gaps at both the fundamental and applications levels is presented.