Corrosion performance of Zr-based coating on substrates obtained by zinc electrodeposition in an alkaline bath\ud is compared to chromate coatings (Cr III and Cr VI). The “nano Zr” is a conversion coating formed by immersion in a\ud hexafluorozirconic acid solution. Since the “nano Zr” coating is transparent, the addiction of a colorant provides color to\ud the surface. In this case, the colorant, when applied after the conversion coating, conferred the yellow color to the surface.\ud The coating produced improves the corrosion protection of the substrate. For this study the samples were analyzed by\ud electrochemical impedance spectroscopy (EIS) and accelerated corrosion test in a humidity chamber. The results showed\ud similar behaviors between the “nano Zr”, colorant and the chromate (Cr III) coating. Therefore this kind of conversion\ud coating is a promising substitute for chromate coatings
Corrosion-resistant alloys (CRAs) include various stainless steels and nickel alloys used in corrosion-aggressive environments encountered in oil and gas operations. Supermartensitic stainless steel (SMSS 13Cr) has been used in the manufacture of steel tubes for oil drilling due to a more financially viable option to replace the austenitic stainless steel (SS 316L) in the oil and gas market. This present work estimates the effect of the hydrogen sulfide (H2S) on SMSS 13Cr and SS 316L in a saline solution, simulating the operating conditions in the oil and gas industry. Corrosion behavior was monitored using a potentiodynamic-potentiostatic-potentiodynamic technique to obtain pitting potential (Ep) or crevice potential (Ecrev) and repassivation potential (Erp) while the long-term open-circuit potential technique was applied to estimate the stable corrosion potential (Ecorr*). A scanning electron microscope equipped with energy dispersive x-ray spectroscopy and optical microscopy was used for surface characterization. With all analyses performed, it was possible to propose a trend regarding the pitting probability. The pitting increases with increasing H2S concentration on SSSM 13Cr; consequently, larger and deeper pits were observed, making it possible to develop into cracks if there are mechanical stresses. On the contrary, the pitting probability for the SS 316L is low (compared with SMSS 13Cr) for all environments reproduced here in this research.
Étude de la réduction de l’oxygène sur des films minces de ZnO élaborés par pulvérisation cathodique: La corrosion est un processus électrochimique impliquant une réaction d'oxydation (dissolution du métal) équilibrée par une réaction de réduction. La réduction de l’oxygène (ORR, oxygen reduction reaction) est l'une des principales réactions cathodiques en corrosion. L'oxygène peut être réduit directement en ions hydroxyle ou indirectement avec le peroxyde d'hydrogène comme espèce intermédiaire. Dans cette thèse de doctorat, l’ORR a été étudiée sur des couches de ZnO qui est un produit de corrosion commun du zinc, un métal de grand intérêt industriel. Des électrodes modèles (films de ZnO texturés et non texturés) ont été déposées sur des substrats de cuivre en utilisant la technique de pulvérisation cathodique. L'ORR a été étudiée dans un électrolyte alcalin en utilisant une électrode tournante à disque et à anneau. Les courbes de polarisation ont révélé un fissurage des films de ZnO texturés qui s’est avéré être dépendant du potentiel appliqué. La spectroscopie d'impédance électrochimique a été utilisée pour évaluer plus finement à quel potentiel la dégradation commençait. Les films minces de ZnO non texturés présentaient une stabilité mécanique nettement améliorée et une activité ORR plus élevée par rapport aux films texturés. Un mécanisme de réaction a été proposé pour l'ORR. Ce modèle a permis d’établir quantitativement que la réduction directe est majoritaire sans que la réduction indirecte puisse être négligée. Il a été possible de démontrer que la réduction indirecte ne s'arrêtait pas à la production de peroxyde d'hydrogène et que ce dernier était ensuite réduit en ions OH- et/ou décomposé en molécules d'oxygène.