Yahui Cai

Yahui Cai

Auto-generated profile, based on publicly available information

Yahui Cai

National University of Defense Technology

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 March 2021 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
SGShuwen Guo
Shuwen Guo
Xiaolong ZhaoXiaolong Zhao
Xiaolong Zhao
YHYongning He
Yongning He
ZPZijian Pan
Zijian Pan
MYMingchao Yang
Mingchao Yang
LZLiangliang Zhang
Liangliang Zhang
A two-terminal 4H-SiC n-p-n bipolar phototransistor detector (PTD) with high gain is demonstrated. It was fabricated using the 4H-SiC epitaxial wafer grown by high-temperature chemical vapor deposition. The PTD shows a large photocurrent and responsivity enhancement over the conventional 4H-SiC p-i-n photodetector (PD). These enhancement effects are owing to the internal gain of the bipolar transistor. The detector shows a high optical gain of ~ 1450 at 360 nm and has a linear response to the ultraviolet (UV) light in the wide light intensity range of 0.7– $700~\boldsymbol \mu \text{W}\boldsymbol /$ cm 2 at a low operating voltage of 3 V. The PTD can respond to the UV light from 220 to 340 nm and the peak responsivity is $\sim 125~\text{A}\boldsymbol /\text{W}$ at 275 nm. This work is significant for developing high-performance SiC-based bipolar phototransistors.

14 October 2021 in IEEE Transactions on Electron Devices
Verified
Journal Article
Closed access
SGShuwen Guo
Shuwen Guo
Xiaolong ZhaoXiaolong Zhao
Xiaolong Zhao
YHYongning He
Yongning He
YCYahui Cai
Yahui Cai
MYMingchao Yang
Mingchao Yang
LZLiangliang Zhang
Liangliang Zhang
In this article, we report the first experimental results of a novel 4H-silicon carbide (SiC) p-i-n photodetector based on a vertical nanocone array (NCA). It is fabricated by electron beam lithography and inductively coupled plasma (ICP) etching technology. The performance of static and dynamic behavior was studied systematically. It shows the responsivity of ~41.9 mA/W under 360 nm at a bias voltage of −0.5 V and has a linear response to the ultraviolet (UV) light in a wide light intensity range of 0.1–10 4 mW/cm 2 . The response time decreased as the light intensity rose from 3 mW/cm 2 to 5 W/cm 2 and then leveled off at higher light intensity (>100 mW/cm 2 ), which is about 0.25 ms. The photodetector −3-dB cutoff is ~3400 Hz at $\boldsymbol {\lambda } = 360$ nm and light intensity = 100 mW/cm 2 . Besides, the detector can respond to the UV light from 260 to 360 nm and the peak responsivity is ~78 mA/W at 320 nm. The analysis results have reference values for the development of an innovative 4H-SiC UV photodetector to some extent.

1 May 2022 in Review of Scientific Instruments
Verified
Journal Article
Closed access
PDF file
YCYahui Cai
Yahui Cai
DWDan Wang
Dan Wang
KQKangcheng Qi
Kangcheng Qi
YHYongning He
Yongning He
For insulators, the accumulated charge on the surface after electron bombardment will interfere with the total electron emission yield (TEEY) measurement. This work develops a novel method to automatically measure the TEEY of insulators based on self-terminating charge neutralization using two neutralization electron guns. We perform theoretical analysis and experimental design for the neutralization of positive and negative charges. Positive charges are neutralized by an electron gun whose cathode is equipotential to the sample. Negative charges are neutralized by another electron gun whose cathode is adjusted to a negative potential with respect to the grounded sample, which is set between EP1/e and EP2/e. We test the control and stability performance of the TEEY measurement system based on the timing design of the electron gun switching and believe that it meets the TEEY measurement requirements. The TEEY measurements of glass, Si, and SiO2 are in good agreement with the data reported in the references, which validates the accuracy of our method in this work. We anticipate that our method provides an essential reference for the rapid TEEY measurements of insulators.

5 March 2021 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
DWDan Wang
Dan Wang
YHYongning He
Yongning He
JGJunjiang Guo
Junjiang Guo
YCYahui Cai
Yahui Cai
ZMZhangsong Mao
Zhangsong Mao
MYMing Ye
Ming Ye
Secondary electron (SE) emission (SEE) from material surfaces is a frequent phenomenon in space and vacuum environments. SEE modulation is important since it governs the performance of some devices such as electronic multipliers or induces some detrimental effects such as multipactors. Surface coating has been reported to modulate SEE effectively, whereas SEE behaviors of coating structures are not clearly understood yet, and the appropriate theory to describe SEE characteristics quantitatively for coating structures is less developed so far. Here, we have prepared four alumina coatings possessing various thicknesses to research the SEE characteristics of coating structures and have shown how the coating thickness affects the SEE behaviors. Besides, by considering coating/substrate as an ideal double-layer structure, we have derived several equations to describe the producing, transmitting, and escaping processes of excited inner SEs and finally constructed a unidimensional SEE model for double-layer structures. The model is applicable to reveal the dependence of true SE yield (TSEY) on the top and bottom layers’ physical properties and estimate TSEY proportions contributed by the top and bottom layers at random energy points. By employing the concept, SEE characteristics of Al2O3/Si, MgO/Si, and TiO2/Si double-layer structures have been quantitatively interpreted. Moreover, the abnormal SEY curve with a double-hump shape, which is induced by the peak position distinction of SiO2/Si structures, can also be explained. This work is of great significance to comprehend TSEY modulating regularities of various double-layer structures applied in surface engineering.

1 September 2020 in Review of Scientific Instruments
Verified
Journal Article
Closed access
PDF file
YCYahui Cai
Yahui Cai
DWDan Wang
Dan Wang
MYMing Ye
Ming Ye
YHYongning He
Yongning He
For insulators, the deposited charge on the surface after electron bombardment interferes with the total electron emission yield (TEEY) measurement. The key to measuring the TEEY of insulators is to eliminate the surface deposited charge. Being different from traditional measurement methods, we develop and demonstrate a new method for measuring the TEEY of insulators in a scanning electron microscope by preparing the micro-patterned metal on the surface of the insulators as a conducting channel. The TEEY of the insulators is measured based on the TEEY of the metal part and the metal–insulator periodic structure. By theoretical analysis, we get a criterion for judging whether the deposited charge is eliminated. The result shows that this method is reliable by measuring the TEEY of Si. Then, we obtained the TEEY of SiO2 by this method with an energy of up to 3000 eV. The measured TEEY characteristics of SiO2 are consistent with the data from the references. Moreover, the surface charge diffusion distance of the insulators can also be estimated under this measuring condition. We get that the maximum value of the TEEY of SiO2 is ∼4.2, and the surface charge diffusion distance of SiO2 is ∼1 µm. In this work, the criterion for judging whether the deposited charge is eliminated is obtained, which has not been proposed in traditional measurement methods.

2 June 2022 in Journal of Vacuum Science & Technology B
Verified
Journal Article
Closed access
PDF file
YCYahui Cai
Yahui Cai
DWDan Wang
Dan Wang
WZWen Zhang
Wen Zhang
YHYongning He
Yongning He
The electrostatic discharge (ESD) from polymer insulators is one of the environment-related anomalies on spacecraft. Theoretically, to mitigate the ESD effects, we could modulate the secondary electron yield (SEY, σ) close to 1 in the entire energy range, suppressing surface charges. However, no single polymer insulator has been reported to achieve this seesaw-type modulation of SEY. Here, we exploringly designed and prepared MgO particles doped polytetrafluoroethylene (PTFE) composite coating to achieve this goal, which exhibits not only the reduced SEY characteristic of the microstructured PTFE coating at low energy but also the enhanced SEY characteristic of the double-layer structure of PTFE and MgO at high energy. The simulation and experiment results demonstrate that MgO particles doped PTFE coating achieves this seesaw-type modulation of SEY. The optimal MgO concentration is 20%, where the maximum SEY (σmax) changes from 2.0 to 1.1; the SEY at 10 keV (σ10k) changes from 0.6 to 0.8, and the higher energy of the SEY equal to 1 (Ep2) increases from 4.5 to 6.5 keV. The discharge test of the microstrip antennas with PTFE-MgO composite coating in a scanning electron microscope verifies the role of the seesaw-type SEY modulation in surface charge suppression. This study supplies an essential reference for suppressing surface charges on vacuum electronics based on modulation of secondary electron emission characteristics.