Planar waveguide devices based on silicon-on-sapphire are emerging as a bridge between mid-infrared (IR) and near-IR wavelength through frequency conversion process. We analyze the limits of indirect detection of mid-IR signals by wavelength conversion in such waveguides and investigate signal-to-noise ratio improvement that is attainable with respect to direct detection using state of the art commercial detectors. Our calculation shows that, in addition to room temperature and high speed operation, the proposed indirect detection can improve the electrical signal-to-noise ratio up to 40 dB compared to direct detection by PbSe, HgCdTe, and InSb detectors, especially in detection of weak mid-IR signals.
13 January 2016 in Journal of the Optical Society of America B
Subwavelength high-contrast gratings (sub- HCGs) were pursued to design mid-IR optical devices based on wavefront engineering. Unlike metallic counterparts, dielectric and semiconductors offer low-loss operation over a wide spectral range. Silicon gratings on sapphire substrate are proposed here as the device platform due to their transparency at near-IR to mid-IR wavelengths. The proposed generic methodology manipulates the wavefront of the reflected wave based on the phase and magnitude of reflectivity for unit cells with different dimensions. To demonstrate the capability of generating an arbitrary wavefront profile, several design examples are shown: (1) a reflective mirror with power efficiency and broad bandwidth of as reflectivity ; (2) a blazed grating with a reflection peak automatically aligned with its diffraction order at 19.5°; (3) a focusing mirror with a focal length of 35 μm and diffraction-limited focus; (4) a sinusoidal phase profile with a periodicity of 8860 nm.
27 September 2022 in Eskişehir Technical University Journal of Science and Technology A - Applied Sciences and Engineering