7 June 2024 in IEEE Transactions on Instrumentation and Measurement
To take full advantage of lab-on-fiber technologies for gas sensing, we propose a reflective Fabry-Perot interferometer (FPI) CO 2 gas sensor composed of the functional material (polyhexamethylene biguanide, PHMB) and a single-mode fiber (SMF)-hollow core capillary (HCC) structure. The theoretical analysis of the FPI cavity mode in the PHMB film is discussed. The experiment results show a maximum sensitivity of 286 pm/ppm in the low concentration region of 0-1000 ppm detection range and a high sensitivity of 6.88 pm/ppm in the atmosphere CO 2 concentration range (200-600 ppm). The response time of the CO 2 sensor is about 10 min. Repeated experiments show that the sensor has good sensing stability and a high selectivity for CO 2 gas. In addition, the sensitivity of our CO 2 sensor is stable to temperature changes. Moreover, the results of monitoring the real in-door atmosphere verify the repeatability and desirable sensing performance of our sensor. This reflective lab-on-fiber CO 2 sensor has a concise structure, low cost, and high sensitivity possessing more possibilities in various and complex applications.
17 September 2025 in Optics Letters
Color center ensembles—light-emitting defects in silicon carbide (SiC) have emerged as exceptional quantum emitters. Femtosecond (fs) laser processing provides a practical solution for their fabrication. While SiC color centers encompass various types, former research mostly focused on fs-laser-induced silicon-vacancy (VSi) centers, leaving other types of centers less investigated. Here, we demonstrate the fabrication of carbon anti-site vacancy (CSiVC) centers on the surface of nitrogen-doped 4H-SiC using fs laser processing. Room-temperature and 1.8 K low-temperature photoluminescence tests provide evidence that the visible fluorescence originates from CSiVC centers. By correlating laser parameters with fluorescence spectrum, we show that single-pulse processing at energies above 400 nJ induces apparent dual emission bands peaked at 675 nm (CSiVC) and 900 nm (VSi) due to the simultaneous presence of the CSiVC and VSi centers in the processed region, while multi-pulse irradiation promotes the generation of CSiVC but causes severe damage to the substrate crystal structure. We further demonstrate the spatial patterning of color center ensembles. This work provides new, to our knowledge, insights into the engineering of fs-laser-induced color centers in SiC.