1 February 2025 in Physics of Fluids
Proper orthogonal decomposition (POD) is a widely used data-driven, reduced-order method for feature extraction and field reconstruction of unsteady flows. The number of modes required in the POD varies greatly with the flow characteristics, and a high number of modes is a significant challenge to effective multiscale flow analysis. The first part of this study shows that the number of modes required for flow field reconstruction increases almost linearly with the energy proportion of the stochastic fluctuation, making it costly to accurately reconstruct the stochastic fluctuation in unsteady flows. To address this issue, the second part of this study proposes a frequency domain proper orthogonal decomposition (FDPOD) method, which reduces the number of modes required for accurate reconstruction while preserving key spectral characteristics of the unsteady flow. Three case studies, i.e., cylinder flow, jet flow, and fan flow, are employed to illustrate the advantage of the developed FDPOD method, which provides a more accurate and efficient tool for turbulence analysis, especially for multiscale flows dominated by stochastic fluctuations.
1 January 2025 in Physics of Fluids
The time-averaged and fluctuating components of flow velocity have significant impacts on the heat exchange performance and noise level of an air-conditioner outdoor unit. This study uses a hot-wire measurement method to investigate the instantaneous velocity field around the outdoor unit. In comparison to the inlet flow field that exhibits a low and uniform average velocity, the outlet flow field displays a high average velocity but is uneven in the radial direction. Both periodic and stochastic components of the velocity disturbances are primarily located at blade tip. A deep neural network model is constructed and trained based on the experimental data, with the objective of mapping the steady flow quantities to the turbulence kinetic energy spectrum, and the results demonstrate that the relative prediction error is smaller than 5% with a probability of 92.49%.