Zhentao Chen

Zhentao Chen

Auto-generated profile, based on publicly available information

Zhentao Chen

School of Vehicle and Mobility, Tsinghua University, Beijing, China

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 December 2022 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
YLYicai Liu
Yicai Liu
ZCZhentao Chen
Zhentao Chen
LWLingtao Wei
Lingtao Wei
XWXiangyu Wang
Xiangyu Wang
LLLiang Li
Liang Li
The braking system is significant for intelligent vehicles, which influences vehicle safety directly. However, under harsh working conditions, the inevitable health degradation and even failure of the braking system may cause severe safety issues. This article proposes a novel braking actuator and sensor fault diagnosis scheme with combined model-based and data-driven pressure estimation methods. The model-based wheel cylinder pressure (WCP) estimator is established first based on the mathematical model of the hydraulic control unit (HCU) from the perspective of cause. The data-driven WCP estimator is then proposed based on the vehicle dynamics multivariate time series (MTS) model with the gated recurrent unit from the perspective of effect. However, acquiring a large dataset is a practical challenge for real vehicle tests, so a novel data augmentation method called shifting is presented to enhance the model generalization ability. Next, fault detection, isolation, and identification are realized by comparing the threshold and the cumulative sum (CUSUM) of the residuals generated by the combined WCP estimation methods. The validation results show that the proposed data-driven method outperforms the traditional multilayer perceptron (MLP), long short-term memory (LSTM), and transformer regarding accuracy and generalization. Vehicle tests simulating sensor and actuator faults validate the proposed fault diagnosis scheme.

16 January 2024 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
YLYicai Liu
Yicai Liu
XWXiangyu Wang
Xiangyu Wang
GZGuowang Zhang
Guowang Zhang
QYQi Yuan
Qi Yuan
ZCZhentao Chen
Zhentao Chen
LLLiang Li
Liang Li
As the preferred configuration for autonomous vehicles, the steer-by-wire (SbW) system replaces the mechanical linkage with electric signals. However, the disconnection of the steering column deteriorates the origin steering feedback torque (SFT), necessitating the road sense construction. To provide the potential driver convincing steering feel, this paper proposes a road sense construction scheme, including an SFT designer employing the data-driven method and an SFT controller based on the friction compensated explicit model predictive control (FEMPC). Initially, the hand wheel module and road wheel module are introduced to analyze network features and establish controller foundations. Subsequently, the torque designer combining convolution neural network (CNN) and gated recurrent unit (GRU) layers is proposed, which can extract the spatial and temporal information of vehicle dynamic (VD) states respectively. To ensure precision and real-time performance, the torque controller based on the explicit model predictive control (EMPC) is then presented and the Brown friction model is also adopted for feedforward compensation. After training the designer with real vehicle data, the whole road sense construction scheme is verified subjectively and objectively. The simulation and experiment results show the authenticity of the designer on the one hand and the precision of the controller on the other.

5 September 2024 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
YLYicai Liu
Yicai Liu
XWXiangyu Wang
Xiangyu Wang
ZCZhentao Chen
Zhentao Chen
LLLiang Li
Liang Li
Path tracking control is crucial for autonomous ground vehicles (AGVs), but it faces challenges from model nonlinearity, parameter variations, and external disturbances. This article proposes a novel model-free path tracking controller that achieves appointed-time performance and alleviates the communication burden. Initially, the path tracking model is abstracted as an unknown nonlinear system, bypassing the complexities of time-varying nonlinearity. A proximate appointed-time prescribed performance function (PPF) is then proposed, whose settling time can be preset arbitrarily using a nonpiecewise function with less conservatism. Subsequently, by utilizing an error scaling function to manage the entry capture problem, a dual-level constrained prescribed performance control (PPC) is developed to ensure proximate appointed-time stability of the preview error and its derivative regardless of initial constraints. Furthermore, an adaptive event-triggered mechanism, inspired by the encoder-decoder concept, transmits only two-bit signals aperiodically, substantially decreasing communication bandwidth requirements. Experimental results confirm the effectiveness, robustness, and efficiency of the proposed scheme.

24 July 2023 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
ZCZhentao Chen
Zhentao Chen
CHChangyao Huang
Changyao Huang
ZLZijun Liu
Zijun Liu
YLYicai Liu
Yicai Liu
XWXiangyu Wang
Xiangyu Wang
LLLiang Li
Liang Li
Integrated brake system (IBS) is gaining attention due to its superior performance and applicability in high-level autonomous vehicles. Despite its high potential, the strong coupling and nonlinearity of the IBS system present significant challenges to controller design. The precision and response speed of the controller are critical factors affecting the performance of the IBS system. This paper proposes a pressure controller based on offset-free explicit model predictive control (OFEMPC) architecture to enhance accuracy and robustness. First, the pressure-position relationship is modeled as a second-order polynomial based on experimental results. Second, the Karnopp friction model is adopted for feedforward compensation, and is optimized according to the system characteristics. Further, a disturbance observer is constructed to estimate the total disturbance, which is composed of model mismatch, time-varying parameters, and unexpected disturbances. Last but not least, an explicit model predictive controller (EMPC) is constructed. To validate the performance of the OFEMPC controller, a co-simulation platform and a bench test are conducted. The results of the simulations and experiments demonstrate that the OFEMPC improves tracking precision and disturbance suppression capability. Additionally, the real-time performance is validated on the microchip.

30 April 2024 in IEEE Transactions on Intelligent Vehicles
Verified
Journal Article
Closed access
YLYicai Liu
Yicai Liu
XWXiangyu Wang
Xiangyu Wang
ZCZhentao Chen
Zhentao Chen
XYXiaoming Ye
Xiaoming Ye
LLLiang Li
Liang Li
The steer-by-wire (SbW) system driven by the dual-three-phase permanent magnet synchronous motor (DTPMSM) is attracting increasing attention. However, the parameter uncertainties, external disturbances, and potential actuator malfunctions pose great challenges for steering execution. To achieve precise, rapid, and robust tracking, this paper proposes a novel fault-tolerant tracking scheme incorporating the fixedtime sliding mode control and the adaptive actuator failure compensation. Initially, this paper delineates the configuration of the DT-PMSM driven SbW system, followed by the development of its mathematic model accounting for actuator faults. Then, a non-singular fixed-time sliding mode surface is developed by leveraging the proposed fixed-time stable system with a fast convergence rate. Subsequently, the fixed-time control law and the adaptive compensation law are proposed, which can ensure fixed-time stability under normal conditions and Lyapunov stability under fault conditions respectively. For accurate fault detection and strategy implementation, an event-triggered mechanism based on the cumulative sum (CUSUM) is introduced. Moreover, the fixed-time extended disturbance observer (FEDO) is designed to suppress the lumped disturbances, whose settling time is also bounded and independent of initial states. Simulation and experimental results substantiate the excellent transient and tracking performances of the proposed scheme under both normal and fault conditions.

20 March 2024 in IEEE Transactions on Vehicular Technology
Verified
Journal Article
Closed access
ZCZhentao Chen
Zhentao Chen
ZLZijun Liu
Zijun Liu
CHChangyao Huang
Changyao Huang
XWXiangyu Wang
Xiangyu Wang
LLLiang Li
Liang Li
YFYanfeng Fang
Yanfeng Fang
Brake-by-wire system (BBW) is quite important for the development of high-level autonomous vehicle which requires fully decoupled structure and superior braking performance. Integrated braking system (IBS) is a state-of-the-art technology of hydraulic BBW, consisting of mechanical, electrical, and hydraulic subsystems. However, the inherent nonlinear characteristics of hydraulic transmission dynamics cause delays and fluctuations in wheel cylinder pressure (WCP), which significantly impact brake performance and passenger comfort. Furthermore, the coupling of the subsystems within the IBS system amplifies the intricacies and challenges associated with controller design. This paper proposes a WCP control architecture to shorten the response time of WCP, suppress pressure fluctuation, and ensure stability. Further, a combined extended state observer (CESO) is designed to estimate unmeasurable states and total disturbance which includes model mismatch, uncertainties, and friction. Additionally, a WCP nonlinear controller (WNC) based on the backstepping method is designed and proved stable theoretically. The response time has been shortened 30 $\mathbf{\%}$ approximately and the tracking precision has been improved 50 $\mathbf{\%}$ approximately. Simulation results demonstrate that the proposed control architecture accurately estimates states, suppresses disturbances, meanwhile improves braking performance. The effectiveness and practical application of this control architecture are further validated through experiments on a test bench.