4 May 2018 in Journal of Fluid Mechanics
The collapse of a cavitation bubble near a rigid boundary induces a high-speed transient jet accelerating liquid onto the boundary. The shear flow produced by this event has many applications, examples of which are surface cleaning, cell membrane poration and enhanced cooling. Yet the magnitude and spatio-temporal distribution of the wall shear stress are not well understood, neither experimentally nor by simulations. Here we solve the flow in the boundary layer using an axisymmetric compressible volume-of-fluid solver from the OpenFOAM framework and discuss the resulting wall shear stress generated for a non-dimensional distance, $\unicode[STIX]{x1D6FE}=1.0$ ( $\unicode[STIX]{x1D6FE}=h/R_{max}$ , where $h$ is the distance of the initial bubble centre to the boundary, and $R_{max}$ is the maximum spherical equivalent radius of the bubble). The calculation of the wall shear stress is found to be reliable once the flow region with constant shear rate in the boundary layer is determined. Very high wall shear stresses of 100 kPa are found during the early spreading of the jet, followed by complex flows composed of annular stagnation rings and secondary vortices. Although the simulated bubble dynamics agrees very well with experiments, we obtain only qualitative agreement with experiments due to inherent experimental challenges.
1 March 2021 in Physics of Fluids
We analyze systematically the acoustic transients emitted during the collapse of a laser-induced cavitation bubble for . γ is the standoff parameter, the ratio of the distance between the bubble's nucleation place and its maximum size. At the bubble collapse, the acoustic signals recorded contain several pressure peaks with rising times as fast as 18 ns. The time delay, , between these peaks is a few hundred nanoseconds apart for bubbles nucleated close to the boundary and decreases with γ. The pressure maxima correspond to shock fronts emitted around the time the bubble reaches its minimum volume and is correlated with the high-speed video recordings of the bubble dynamics. We also show that the amplitude ratio of the first to second acoustic transient is strongly dependent on γ. The experimental results are complemented with numerical simulations based on the Volume-of-Fluid method. The simulated results help clarify the physical mechanisms leading to the generation of acoustic transients and unveil in detail the morphology of the bubble approaching its minimum volume, a feature that cannot be resolved with the high-speed data. Furthermore, the numerical results reveal that the impact of the liquid jet on the rigid wall ensues a local increase in pressure over a significant time period, contrary to the shock wave formed during bubble collapse, which produces a sharp transient pressure peak that propagates radially outwards along the rigid wall. We also discuss the validity and shortcomings of the simulation and how to improve them in the future.
27 March 2020 in Science Advances
Insect-inspired surfaces repel bubble jets.
1 September 2010 in Flow Measurement and Instrumentation
13 June 2017 in Physical Review Fluids
When a cavitation bubble oscillates and collapses in the vicinity of a solid boundary (a substrate), it induces intense microconvection in the surrounding liquid and—of high practical importance—directly at the substrate. As the involved flows are fast, highly unsteady, and possess an impressive shear, experiments are difficult and data are scarce. Here, insight into the generation and dynamics of the liquid flows from individual cavitation bubbles collapsing in the vicinity of a solid boundary is provided. Single laser-induced cavitation bubbles (maximum radius around 375 μm) are seeded at precisely defined standoff distances to a substrate by a focused laser pulse. The bubble shape dynamics are imaged by synchronized high-speed cameras from two perpendicular viewing angles. Recording of the shape dynamics is combined with the simultaneous time-resolved measurement of the full flow field on a micrometer-resolution. Measurements employ a high-speed hybrid particle imaging velocimetry and particle tracking velocimetry technique, with a temporal sampling of up to 135 kHz, using fluorescent microparticles as tracers. The time evolution of the unsteady flow field induced by one and the same bubble over a time period much longer than the bubble lifetime is determined. The shear flow at the substrate is analyzed and a liquid transport toward and away from the substrate surface is demonstrated. Depending on the bubble standoff distance, very different flow patterns are observed. The dominant liquid displacement is caused by the long-lived vortex ring being produced during bubble collapse. Most peculiar, the bubble standoff distance determines the sense of direction of the circulation associated with the vortex ring and, consequently, whether the vortex is ejected from the substrate or radially stretches over it. The results are relevant for the understanding of cavitation effects, such as surface cleaning, erosion, and mixing or in biomedical context and may serve as basis for numerical simulations.
21 June 2011 in Journal of Fluid Mechanics
We report on an experimental study of cavitation bubble dynamics within sub-millimetre-sized narrow gaps. The gap height is varied, while the position of the cavitation event is fixed with respect to the lower gap wall. Four different sizes of laser-induced cavitation bubbles are studied using high-speed photography of up to 430,000 frames per second. We find a strong influence of the gap height, H, on the bubble dynamics, in particular on the collapse scenario. Also, similar bubble dynamics was found for the same non-dimensional gap height η = H/Rx, where Rx is the maximum radius in the horizontal direction. Three scenarios are observed: neutral collapse at the gap centre, collapse onto the lower wall and collapse onto the upper wall. For intermediate gap height the bubble obtains a conical shape 1.4 < η < 7.0. For large distances, η > 7.0, the bubble no longer feels the presence of the upper wall and collapses hemispherically. The collapse time increases with respect to the expansion time for decreasing values of η. Due to the small scales involved, the final stage of the bubble collapse could not be resolved temporally and numerical simulations were performed to elucidate the details of the flow. The simulations demonstrate high-speed jetting towards the upper and lower walls and complex bubble splitting for neutral collapses.