1 January 2021 in Shock and Vibration
Rockburst of deep roadway was induced by the superposition of mine earthquake disturbance and high static stress exceeding the limit strength of coal‐rock mass. To study the roadway impact instability characteristics caused by mine earthquake disturbance and to propose an optimized support scheme, the discrete element model of the roadway structure was established based on the 1305 working face of the Zhaolou Coal Mine. The influence of mine earthquake amplitude and hypocenter location on the roadway was analyzed. The mesocrack evolution characteristics of the roadway were simulated and reproduced. Characteristics of stress field, crack field, displacement field, and energy field of the disturbed roadway with different support schemes were studied. The results showed that the greater the amplitude of the mine earthquake was, the severer the roadway impact failure was. The upper and left hypocenters had a significant influence on the roadway. The superposition of the high static stress and the dynamic stress due to the far‐field mine earthquake resulted in the impact instability of coal‐rock mass around the roadway, causing severe roof subsidence as well as rib and bottom heave. The evolution of tensile cracks caused the severe impact failure of roadway from a mesoscopic perspective. Using the flexible support to reinforce the roadway retarded the stress decline in roof and rib, improved the self‐stability, reduced the number of near‐field cracks, and decreased the displacement. Meanwhile, it allowed the roof and rib deformation, which was conducive to releasing elastic energy in surrounding rocks and reducing mine earthquake energy. The cracks and deformation in the floor were controlled by using the floor bolt. The optimal support scheme for a roadway to resist mine earthquake disturbance was proposed: “bolt‐cable‐mesh‐steel strip‐π‐beam + floor bolt.” The research results have a specific guiding significance for the support of the coal mine roadway.
11 December 2018 in Geotechnical and Geological Engineering
1 January 2021 in Shock and Vibration
A discrete element method code was used to investigate the damage characteristics of jointed rock masses under repetitive impact loading. The Flat‐Joint Contact Model (FJCM) in the two‐dimensional particle flow code (PFC2D) was used to calibrate the microparameters that control the macroscopic behavior of the rock. The relationship between macro‐ and microparameters by a series of uniaxial direct tension and compression numerical tests based on an orthogonal experimental design method was obtained to calibrate the microparameters accurately. Then, the Synthetic Rock Mass (SRM) method that incorporates joints into the calibrated particle model was used to construct large‐scale jointed rock mass specimens, and the repetitive drop hammer impact numerical tests on SRM specimens with different numbers of horizontal joints and dip angle joints were carried out to study the damage evolution, stress wave propagation, and energy dissipation characteristics. The results show that the greater the number of joints, the greater the number of cracks generated, the greater the degree of damage, and the more energy dissipated for rock masses with horizontal joints. The greater the dip angle of joints, the less the number of cracks generated, the less the degree of damage, and the less energy dissipated for rock masses with different dip angles of joints. The impact‐induced stress waves will be reflected when they encounter preexisting joints in the process of propagation. When the reflected stress waves meet with subsequent stress waves, the stress waves will change from compressional waves to tensile waves, producing tensile damage inside rock masses.
1 January 2025 in Geofluids
In deep foundation pit engineering, leakage of underground diaphragm walls poses a serious threat to construction safety and the surrounding environment. This study employs finite element numerical simulation to investigate the detection of such leakage using the cross‐well electrical method. The influence of acquisition device, electrode spacing, and well spacing on detection performance is systematically analyzed. Additionally, the accuracy of apparent resistivity imaging and leakage localization is assessed under various leakage conditions, including leakage point resistivity, leakage size, leakage depth, and the number of leakage points. The results demonstrate that the AM ‐ BN dipole–dipole acquisition device offers superior localization accuracy and deeper penetration capability. Notably, reducing the electrode spacing below 2 m significantly enhances detection precision and effectively suppresses spurious anomaly interference. The cross‐well electrical method exhibits robust performance in identifying a broad range of leakage scenarios. Moreover, a reliable localization approach by identifying the minimum value location of the apparent resistivity curve is proposed.