This report describes the fabrication of a novel microfluidics nanobiochip based on a composite comprising of nickel oxide nanoparticles (nNiO) and multiwalled carbon nanotubes (MWCNTs), as well as the chip's use in a biomedical application. This nanocomposite was integrated with polydimethylsiloxane (PDMS) microchannels, which were constructed using the photolithographic technique. A structural and morphological characterization of the fabricated microfluidics chip, which was functionalized with a bienzyme containing cholesterol oxidase (ChOx) and cholesterol esterase (ChEt), was accomplished using X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy. The XPS studies revealed that 9.3% of the carboxyl (COOH) groups present in the nNiO-MWCNT composite are used to form amide bonds with the NH2 groups of the bienzyme. The response studies on this nanobiochip reveal good reproducibility and selectivity, and a high sensitivity of 2.2 mA/mM/cm2. This integrated microfluidics biochip provides a promising low-cost platform for the rapid detection of biomolecules using minute samples.
GaMnN growth on GaAs (100) using a GaN single precursor via molecular beam epitaxy was undertaken. The grown layers revealed -type conduction. It is confirmed that reveals room temperature ferromagnetism with hysteresis loop having a coercivity of The segregated phase showing a transition temperature of is assigned to and which enhances the conductivity of the surrounding GaMnN region. As a consequence, the GaMnN layer with segregation revealed an anomalous Hall effect at room temperature proving magnetotransport in GaMnN phase. The enhanced conductivity of GaMnN by the highly conductive second phase also revealed the importance of the role of the free carriers in the carrier-mediated ferromagnetism.
22 September 2009 in IEEE Transactions on Magnetics
The pulsed eddy current (PEC) system has been developed for the detection of the wall thinning in the pipelines of nuclear power plants (NPPs) without removing the insulation. The PEC signal response from the stainless steel sample which the thickness varies from 1 mm to 5 mm was investigated at the position of 6 mm above the sample surface. A LabVIEW based data acquisition program was developed to continuously display the thickness variation of the tested sample. The signal analysis technique such as power spectrum density (PSD) of Fourier transform is applied to obtain an optimum parameter to describe the wall thinning of pipeline steel. This technique can be used as a potential tool to detect the local wall thinning of a pipe without the removal of the insulation.
11 December 2012 in Angewandte Chemie International Edition