This study investigated the potential for energy savings and reduction in CO2 emissions in hospital buildings in Bosnia and Herzegovina (B&H), through the implementation of energy renovation measures. The building sector in B&H is characterized by significant energy consumption, and hospitals account for a substantial portion of the total energy consumption in public buildings. This study analyzes certain energy renovation measures for selected hospital buildings, including the installation of thermal insulation on exterior walls and flat roofs, and the installation of a photovoltaic plant on the flat roof. The Preference Selection Index (PSI) multicriteria decision-making method was employed to evaluate and rank renovation scenarios based on energy, environmental, and financial criteria. The results indicate that the most preferred measure is the installation of a photovoltaic plant on a flat roof, resulting in significant primary energy and CO2 savings, with an acceptable discounted payback period. The findings emphasize the effectiveness of energy renovation measures in enhancing energy efficiency and reducing the environmental impact of hospital buildings in B&H.
Drying of textiles in industrial facilities represents an energy-intensive process where a large number of measures for energy and production cost savings can be introduced. Typical measures include the introduction of energy management, waste-heat recovery, process optimization and so on. Drying is a complex process with coupled heat and mass transfer between the heated air and humid textile, where parameters such as the air flow rate, air velocity and its flow regime and textile velocity and water content represent significant influential factors. The distribution of air temperature and density inside the drying section of an industrial stenter frame is analyzed in detail using three-dimensional numerical simulation, where the textile is modeled as a porous medium to analyze moisture diffusion within the textile. Heated air is introduced into a chamber by inlet nozzles and removed by exit nozzles, the distribution of which is based on actual machine configuration. A humid textile is introduced into a section, where temperature and density distribution within the textile are calculated for selected time periods. During the simulation in the Fluent program, models of specific component transport, multiphase air flow, turbulent flow, porosity and evaporation were used. The results represent a valuable data set that provides an in-depth insight into the drying process in the industrial stenter machine.
The study evaluates the sustainable development of 42 European countries using a multi‐criteria decision analysis (MCDA) approach, based on 29 indicators covering the economic, social, and environmental pillars. All three pillars are assessed both individually and in consolidated form to provide a comprehensive view of countries' sustainability performance. To track individual countries' progress over time, MCDA analysis based on indicator gradients is applied. Sustainability performance for 2030, the target year for most global sustainability goals, is estimated using the Fractional Discrete Grey Model (FDGM (1,1)). Based on MCDA scores from 2000, 2010, 2020, and 2030, countries are grouped into high, medium, and low sustainable development clusters. Results indicate that Switzerland, Sweden, and Norway consistently achieve the highest scores but show slower progress, whereas North Macedonia, Russia, Serbia, and Bosnia and Herzegovina rank lowest. The proposed methodology provides a solid basis for defining regional strategies and guiding national policies by highlighting both shared and country‐specific sustainability challenges.