This letter discusses pointing errors in underwater optical communication caused by environmental disturbances and uncertainties that cannot be well measured and controlled in previous optical alignment methods. The bore-sight and jitter effects are identified in the motion model of the mobile platform. We propose to use the sensor suite that includes a pressure sensor, super short baseline (SSBL) acoustic system, Doppler velocity log (DVL), and fiber optic gyro (FOG) to observe and estimate pointing errors during communication. The pointing errors updated by the particle filter can be shared with the pointing, acquisition, and tracking (PAT) system and thruster system. The sea experiments reveal that the proposed method can measure pointing errors and limit error growth by maneuvering the mobile platform.
The development of multiple autonomous underwater vehicles (AUVs) has revolutionized the traditional reliance on a single, costly AUV for conducting underwater surveys. This shift has garnered increasing interest among marine researchers. Communication between AUV fleets is an urgent concern due to the data rate limitation of underwater acoustic communication. Laser-based underwater wireless optical communication (UWOC) is a potential solution once the link-establishing requirement between AUVs can be met. Due to the limited coverage area of the laser beam, the previous pointing, acquisition, and tracking (PAT) method is to quickly adjust the beam direction and search for the target according to the set scanning path. In response to these challenges, we propose a scalable laser-based link establishment method that combines the maneuvering of the AUV, the acoustic positioning, and the control of the optical system. Our proposed approach has consistently outperformed the existing PAT method in simulated environments, effectively establishing laser links. Importantly, we have successfully implemented our approach in machine experiments, confirming its practical applicability.
High‐speed underwater wireless optical communication holds immense promise in ocean monitoring and surveys, providing crucial support for the real‐time sharing of observational data collected by autonomous underwater vehicles (AUVs). However, due to inaccurate target information and external interference in unknown environments, link alignment is challenging and needs to be addressed. In response to these challenges, we propose a reinforcement learning‐based alignment method to control the AUV to establish an optical link and maintain alignment. Our alignment control system utilizes a combination of sensors, including a depth sensor, Doppler velocity log (DVL), gyroscope, ultra‐short baseline device, and acoustic modem. These sensors are used in conjunction with a particle filter to observe the environment and estimate the AUV's state accurately. The soft actor‐critic algorithm is used to train a reinforcement learning‐based controller in a simulated environment to reduce pointing errors and energy consumption in alignment. After experimental validation in simulation, we deployed the controller on an actual AUV called Tri‐TON. In experiments at sea, Tri‐TON maintained the link and angular pointing errors within 1 m and , respectively. Experimental results demonstrate that the proposed alignment control method can establish underwater optical communication between AUV fleets, thus improving the efficiency of marine surveys.