Mark D. Bowman

Mark D. Bowman

Auto-generated profile, based on publicly available information

Mark D. Bowman

Lyles School of Civil Engineering, Purdue University, West Lafayette, IN

Research Focus & Metrics

Academic Career Length

33Years (1994-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 August 2019
Verified
Conference Paper
Closed access
AAAreeg Ahmed
Areeg Ahmed
AAAnas Ali
Anas Ali
AKAbdelrahman A Karrar
Abdelrahman A Karrar
MBMark Bowman
Mark Bowman
PCPreston Cooper
Preston Cooper
This work develops expressions for estimating the change in active and reactive power for industrial motors in response to voltage and frequency variations around the operating point. Magnetizing circuit saturation is accounted for by using incremental reactance. The expressions are simplified for a quick estimate using stator measurements and parameters. The expressions are validated using simulation, and further, a test was carried out in a nuclear power plant to determine the voltage sensitivities experimentally. Both simulation and test show that the expressions are capable of yielding a fair estimation of the required sensitivities.

20 April 2023 in Transportation Research Record: Journal of the Transportation Research Board
Verified
Journal Article
Closed access
ESEdgar Oscary Soriano Somarriba
Edgar Oscary Soriano Somarriba
MBMark D. Bowman
Mark D. Bowman
One of the main causes of infrastructure deterioration is corrosion. Different types of corrosion such as surface and pitting corrosion have been researched and addressed by industry. However, pack rust is another type of corrosion that requires attention because of its complexity and lack of research. Pack rust occurs between overlapping plates, which makes it difficult to remove and treat. A previous survey in the State of Indiana highlighted that a significant number of steel bridges exhibit some level of pack rust in the bottom flange of splice connections. Consequently, this study focuses on evaluating mitigation strategies that can delay further development of pack rust at the interface between the connected elements in a typical tension splice. Additionally, this study also examines the effects of pack rust on the tensile strength of a flange splice connection. The ultimate goal is to develop a series of guidelines that can be implemented in the field to address pack rust. To accomplish this, specimens were created to model the bottom splice connection. These specimens were exposed to a corrosive environment for different periods, and later tested under tension to evaluate any strength reduction. The level of pack rust developed in this study, which correlates to an exposure in the field of 20 to 40 years, increased the slip resistance of the specimens tested and did not decrease the ultimate strength. Finally, out of the three mitigation products tested, two had satisfactory results that merit further research and field testing.

1 May 1994 in Journal of Materials in Civil Engineering
Verified
Journal Article
Closed access
CMCommittee on Metal Materials
Committee on Metal Materials
MBMark D. Bowman
Mark D. Bowman
HMHarry I. McHenry
Harry I. McHenry
CMCraig C. Menzemer
Craig C. Menzemer
JBJohn E. Bower
John E. Bower