Xiaoming Wang

Xiaoming Wang

Auto-generated profile, based on publicly available information

Xiaoming Wang


Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 February 2023 in Metals
Verified
Journal Article
Open access
PDF file
ZRZHIQIANG REN
ZHIQIANG REN
SZSheng Zhu
Sheng Zhu
XWXiaoming Wang
Xiaoming Wang
YZYang Zhao
Yang Zhao
GHGuofeng Han
Guofeng Han
GTGen Tian
Gen Tian
As an attractive high-entropy alloy, AlCrCoNiCu high-entropy alloy has excellent corrosion resistance, wear resistance, and anti-bacterial capabilities, and is considered to be a potential substitute material for marine and nuclear industry materials with great potential. One key to further optimizing the performance of high entropy alloy was to prepare high entropy alloy powder materials with uniform composition, good flow-ability, and stable performance. In this work, the AlCrCoNiCu high entropy alloy powder was prepared by the gas atomization method. The results indicated that the powder was spherical in shape, homogeneous in composition, and composed of a face-center cubic (FCC) phase. After adding Fe and Mn elements, FCC and body-center cubic (BCC) phases appeared and the particle size of the powder was mainly located at 10–50 μm. Furthermore, the larger the particle size was, the more obvious the surface roughness was. With the decreasing powder size, its shape became relatively regular, and the surface roughness decreased. This work provided an experimental and theoretical reference for preparing high-performance single-phase and multi-phase high entropy alloy spherical powders.

4 August 2021 in Metals
Verified
Journal Article
Open access
PDF file
GTGen Tian
Gen Tian
XWXiaoming Wang
Xiaoming Wang
WWWenyu Wang
Wenyu Wang
QCQing Chang
Qing Chang
YZYang Zhao
Yang Zhao
SZSheng Zhu
Sheng Zhu
Wire arc additive manufacturing (WAAM) technology is widely used in the fields of aerospace, shipbuilding, and automobile industry due to the advantages of fast forming speed, high material utilization and low production cost. WAAM is extremely sensitive to parameters, and different processes and materials produce different deposition effects and properties. Therefore, it is of great significance to study the WAAM formability of various materials. Herein, the microstructure, mechanical properties, and galvanic corrosion behavior of the low-carbon high-strength steel (10CrNi3MoV) fabricated by cold metal transfer (CMT) WAAM technology were investigated. The single-channel multilayer deposition parts were prepared by reciprocating deposition, and the forming parts were divided into six zones by observing the different positions of the structure: matrix, heat-affected zone, remelting zone, initial deposition zone, interlayer zone, and interlayer bonding zone. Electron backscattered diffraction (EBSD) analysis showed that the amount of recrystallization and substructure in the deposition layer had no obvious change, and the texture phenomenon was the most obvious in the initial deposition zone of the pole map reaction. The texture phenomenon gradually weakened with the increase of the deposition layers. The microhardness from the matrix to the deposition stable zone was tested. The hardness of the matrix changed smoothly, that of the heat-affected zone was the largest, and that of the deposition layer was 221–282 HV0.2. The tensile properties were tested in different directions and angles, and the yield strength and tensile strength of the deposited layer were more than 550 MPa and 760 MPa, respectively. The galvanic corrosion behavior between the deposited layer and the matrix was investigated, and the polarization curve showed that the corrosion potential of the deposited layer was lower than that of the matrix, and the corrosion current density of the deposited layer was higher than that of the matrix.

23 March 2022 in Coatings
Verified
Journal Article
Open access
PDF file
SWShu Wen
Shu Wen
XWXiaoming Wang
Xiaoming Wang
ZRZHIQIANG REN
ZHIQIANG REN
An Al86Ni6Y4.5Co2La1.5 amorphous coating was prepared on a ZM5 magnesium alloys substrate by using high-velocity air fuel (HVAF) spray. The coating contained a 75.8% amorphous phase (volume fraction) in addition to the crystallization phases of α-Al, Al4NiY, and Al9Ni5Y3. The microhardness reached 420 HV0.05 for the coating. The coating could endure 500 h neutral salt spray tests without apparent corrosion. Moreover, the coating exhibited a much nobler corrosion potential and two orders of magnitude smaller corrosion current density compared to the substrate. These improvements can be attributed to the compact coating structure and the passive film formed during corrosion.

1 September 2018 in Vacuum
Verified
Journal Article
Closed access
YCYongxing Chen
Yongxing Chen
SZSheng Zhu
Sheng Zhu
XWXiaoming Wang
Xiaoming Wang
BYBaijun Yang
Baijun Yang
ZRZhiqiang Ren
Zhiqiang Ren
SWShu Wen
Shu Wen

8 September 2021 in Surface Engineering
Verified
Journal Article
Closed access
YYYichuan Yin
Yichuan Yin
SZSheng Zhu
Sheng Zhu
QCQing Chang
Qing Chang
WWWenyu Wang
Wenyu Wang
GGGuangyuan Gao
Guangyuan Gao
GHGuofeng Han
Guofeng Han
Ti-45Al-7Nb-2V-2Cr alloy coating was prepared on the surface of the 5083 aluminium alloy by HVAF technology to protect the substrate from wear attacks. The microstructure and phase composition of the coating were characterized and analysed by scanning electron microscope and X-ray diffraction, and the bonding strength and elastic modulus of the coating were accordingly measured. There were metallurgical bonding and mechanical bonding between the particles in the Ti-45Al-7Nb-2V-2Cr alloy coating, and the bonding mode between the coating and aluminium alloy substrate was mechanical bonding. The Ti-45Al-7Nb-2V-2Cr alloy coating was mainly composed of γ-TiAl, α2-Ti3Al, and β-Ti phase. The microhardness of the aluminium alloy Ti-45Al-7Nb-2V-2Cr alloy coating was increased by more than four times higher than that of the substrate, and the wear volume was reduced by more than 69%. The wear mechanism of the coating was abrasive wear and oxidation wear, which possessed excellent wear resistance.

30 August 2021 in Frontiers in Materials
Verified
Journal Article
Open access
RWRongcheng Wang
Rongcheng Wang
YZYang Zhao
Yang Zhao
QCQing Chang
Qing Chang
FYFengshi Yin
Fengshi Yin
XWXiaoming Wang
Xiaoming Wang
GHGuofeng Han
Guofeng Han
In this paper, the microstructure and mechanical properties of the SG-CuAl8Ni6 Ni-Al bronze straight wall were studied, which was fabricated by the cold metal transfer (CMT) arc additive manufacturing technology. This Ni-Al bronze cladding layer of SG-CuAl8Ni6 is composed mainly of α-Cu, residual β phase, rich Pb phase and κ phase. The microstructure of this multilayer single-channel Ni-Al bronze straight wall circulating presents the overall periodic law, which changes from fine cellular crystals, columnar crystals to dendritic crystals with the increase of the distance from the substrate. The Vickers hardness value of the Ni-Al bronze straight wall decreases with the distance of substrate are between 155 and 185 HV0.5. The microhardness and elastic modulus of the Ni-Al bronze specimen are 1.57 times and 1.99 times higher than these of the brass matrix, respectively. The ultimate tensile strength (UTS) of the straight wall in the welding direction and 45° downward-sloping is greater than that of about 550 MPa in the stacking direction, and the elongation value in the welding direction is the highest. With the increase in interlayer temperature, the grain size increased gradually, and the tensile strength decreases slightly.