Hasan Gedikli

Hasan Gedikli

Auto-generated profile, based on publicly available information

Hasan Gedikli

Karadeniz Technical University

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 July 2020 in Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
Verified
Journal Article
Open access
PDF file
DMDursun Meri̇ç
Dursun Meri̇ç
HGHasan Gedi̇kli̇
Hasan Gedi̇kli̇
Bu çalışmada; alüminyum alaşımıAA6063’ den yapılmış farklı koniklik açısı (0°, 5° ve 10°) ve eksenel doğrultuda farklı kalınlığa (0,5 mm - 4 mm) sahip bölgelerden oluşmuş fonksiyonel derecelendirilmiş tüplerin (FDT) enerji sönümleme davranışları sayısal olarak incelenmiştir. Analizler sonucunda tüplerin deformasyon şekilleri, kuvvet-yer değiştirme ve enerji-zaman grafikleri elde edilmiştir. Farklı koniklik açıları için en düşük pik kuvvet ve en yüksek özgül enerji sönümleme (ÖES) değerlerini sağlayan optimum bölge kalınlıkları, İleri Beslemeli Yapay Sinir Ağları (İBYSA) tekniğini içeren optimizasyon yöntemi ile belirlenmiştir. Optimizasyon sonucunda elde edilen katman kalınlıkları fonksiyonel derecelendirilmiş tüpün enerji sönümleme davranışını iyileştirdiği görülmüştür.

31 December 2025 in The International Journal of Materials and Engineering Technology
Verified
Journal Article
Open access
DKDoğukan Kolcu
Doğukan Kolcu
DMDursun Meriç
Dursun Meriç
HAHüseyin Can Aksa
Hüseyin Can Aksa
TDTuğçe Dokuz
Tuğçe Dokuz
HYHarun Yanar
Harun Yanar
GPGencaga Purcek
Gencaga Purcek
Cold Spray (CS) is a solid-state coating technology where metal powders are propelled at supersonic velocities to form dense coatings via severe plastic deformation upon impact, without melting. This mechanism preserves the feedstock material's integrity by minimizing thermal degradation, such as oxidation and residual stresses, making it ideal for surface refurbishment and restoration in thermally sensitive applications. In this study, CS deposition was sprayed onto a Ti6Al4V substrate (60x60x4 mm³) fabricated via Selective Laser Melting (SLM), using spherical Ti6Al4V powders with a particle size distribution of 0–20 µm. The primary objective was to optimize CS process parameters to observe coating integrity and interfacial adhesion. Considering the limitations of low-pressure spraying, temperature, nozzle-distance, and advancement speed were fixed at constant values, while gas pressure and powder feed rate were systematically varied. Coating characteristics, including thickness, homogeneity, surface morphology, and adhesion—were evaluated through scanning electron microscopy (SEM). Subsequently, under the previously optimized selected parameter set, the effect of different advancement speeds (10, 20, 30, and 40 mm/s) on the accumulation behavior was analyzed.

31 December 2025 in The International Journal of Materials and Engineering Technology
Verified
Journal Article
Open access
IDİbRahim Can Duman
İbRahim Can Duman
DMDursun Meriç
Dursun Meriç
HGHasan Gedikli
Hasan Gedikli
RERemzi Ecmel Ece
Remzi Ecmel Ece
ÖCÖmer Necati CORA
Ömer Necati CORA
Additive manufacturing (AM) has emerged as a transformative production technology, enabling the fabrication of complex geometries and customized components, particularly in industries such as aerospace, defense, biomedical, automotive, and energy. The design flexibility offered by AM provides significant advantages, especially in producing intricate structures that are difficult to achieve using conventional manufacturing methods. Among AM-compatible materials, AlSi10Mg alloy stands out due to its high specific strength, excellent thermal and electrical conductivity, and low density. However, the layer-by-layer nature of Laser Powder Bed Fusion (L-PBF) often results in poor surface quality and insufficient mechanical properties. Therefore, post-processing methods are essential to enhance the surface integrity of AM-produced parts. In this study, the cold spraying (CS) process was applied to improve the surface properties of AlSi10Mg samples manufactured by the L-PBF technique. The samples 100x50x5 mm3 in dimensions were fabricated using Aconity MIDI L-PBF machine and characterized using optical microscopy and a non-contact profilometer. Subsequently, Ti6Al4V powders (15–53 µm in diameter) were deposited onto the samples using a cold spray system under the following process parameters: air temperature of 460 °C, air pressure of 7 bar, powder feed rate of 24.9 g/min, and nozzle distance of 5 mm. The spraying process was performed at three different traverse speeds (10, 20, and 30 mm/s) to examine the influence on surface roughness. In the continuation of the study, post-spray surface measurements were taken and compared with the measurements obtained in AM part production.