1 January 2014 in Procedia Engineering
This paper presents the study of the tensile, compressive, flexural, impact energy and water absorption characteristics of the luffa fiber and Ground nut reinforced epoxy polymer hybrid composites. Luffa fiber and Ground nut reinforced epoxy resin matrix composites have been developed by hand lay-up technique with luffa fiber treated conditions and Ground nut with different volume fraction of fibers as in 1:1 ratio (10%, 20%, 30%, 40% and 50%). Effects of volume fraction on the Tensile, Compressive, Flexural, Impact strength were studied. SEM analysis on the composite materials was performed. Tensile strength varies from 10.35MPa to 19.31MPa, compressive strength varies from 26.66MPa to 52.22MPa, flexural strength varies from 35.75MPa to 58.95MPa and impact energy varies from 0.6 Joules to 1.3 Joules, as a function of fiber volume fraction. The optimum mechanical properties were obtained at 40% of fiber volume fraction of treated fiber composites. Fractures surface of the composite shows the pull out and de-bonding of fiber is occurred
30 March 2018 in Materials and Manufacturing Processes
Aluminum metal matrix composites (AMMCs) explicitly show better physical and mechanical properties as compared to aluminum alloys and results in a more preferred material for a wide range of applications. The addition of reinforcements embargo AMMCs employment to industry requirements by increasing order of machining complexity. However, it can be machined with a high order of surface integrity by nonconventional approaches like abrasive water jet machining. Hybrid aluminum alloy composites were reinforced by B4C (5–15 vol%) and solid lubricant hBN (15 vol%) particles and fabricated using a liquid metallurgy route. This research article deals with the experimental investigation on the effect of process parameters such as mesh size, abrasive flow rate, water pressure and work traverse speed of abrasive water jet machining on hybrid AA6061-B4C-hBN composites. Water jet pressure and traverse speed have been proved to be the most significant parameters which influenced the responses like kerf taper angle and surface roughness. Increase in reinforcement particles affects both the kerf taper angle and surface roughness. SEM images of the machined surface show that cutting wear mechanism was largely operating in material removal.
1 November 2019 in Computers & Industrial Engineering
23 April 2019 in Journal of Advances in Management Research
Purpose: Urbanization and globalization in India have led to the depletion of resources and degradation of the environment to meet the demands. Because of these issues, researchers and practitioners have begun to study various strategies to reduce the level consumption of resources to utilize it for present and future needs. In pursuit of finding solutions to the problems, sustainable building construction is found as the best key to avoid depletion of resources. Sustainable material selection is found as a vital strategy in construction. The paper aims to discuss this issue.Design/methodology/approach: A three-phase methodology is proposed for framing the assessment model for construction industries to select materials for construction. In the first phase, a total of 23 sub-criteria of triple bottom line (TBL) and four brick materials as alternatives were identified. The second phase finds the weights and ranks of criteria and sub-criteria using the best worst methodology (BWM) the third phase involves ranking of materials concerning sub-criteria weights determined in phase II using Fuzzy Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS).Findings: The objective of study is fixed to identify the criteria list for the selection of material in construction industries from the literature review especially for Indian construction industries; to rank the criteria for selection of materials with the help of the BWM approach; and to prioritize the identified materials in the view of sustainability with the help of Fuzzy TOPSIS in construction industries perspective. This study analyzed and choosing right sustainable materials by the three pillars of sustainability which are the environment, economic and social, also called TBL, for Indian construction companies by framing a sustainable material assessment model.Originality/value: The results of this study facilitate to frame an assessment model for evaluating and selecting sustainable building materials.
1 February 2022 in Journal of Cleaner Production
14 April 2020 in Metals and Materials International