16 October 2023 in Composites Science and Technology
1 October 2023 in APL Materials
Film capacitors have widely been used in modern electrical/electronic equipment because of their high insulation property and high-power density. However, the traditional dielectric films suffered a high conduction loss under high temperature and electric field conditions, which leads to the depression of high temperature energy storage properties. Herein, sandwich-structured composite films using biaxially oriented polyethylene terephthalate (BOPET) as the outer layers were prepared to construct the interfacial barrier, which was beneficial for hindering the propagation of breakdown path. In addition, epoxy resin was applied as the adhesive inner layer to bind the outer layers up tightly, while the boron nitride nanosheets (BNNSs) in the inner layer further improved the breakdown strength of the film and inhibited the conduction loss, especially under high temperature and electric field conditions. The composite film with optimized BNNSs content had a high discharged energy density of 9.11 J/cm3 and a ultrahigh charge–discharge efficiency of 95% at 25 °C, while the values were 6.45 J/cm3 and 70% at 150 °C, respectively, of which both were much higher than those of pure BOPET. Thus, the sandwich-structure method points out a promising way of preparing dielectric films with excellent energy storage performances.
13 November 2023 in Applied Physics Letters
With the continuous development of modern electronic and power equipment, practical applications in harsher environment call for film capacitors with higher temperature resistance. Here, we designed a multilayer film including two outer layers of biaxially oriented polyethylene terephthalate (BOPET), two inorganic layers of boron nitride nanosheets (BNNSs), and an intermediate epoxy layer. Due to the blocking effect of the BNNSs layer, the propagation of the breakdown path is hindered, which improves the breakdown strength of the film. Meanwhile, the carrier transport in the medium is effectively hindered, reducing the conduction loss of the composite film. As a result, the optimized multilayer composite film had a high discharged energy density of 8.76 J/cm3, maintaining a high charge-discharge efficiency of 95% at 25 °C, while remarkable values of 7.04 J/cm3 and 73% were obtained even at 150 °C, which showed prominent improvements compared with BOPET. Thus, it turns out to be a promising strategy of fabricating high temperature dielectric films.