4 January 2022 in IEEE Transactions on Microwave Theory and Techniques
For the past 50 years, open-ended coaxial lines were commonly employed for the determination of electromagnetic properties of various materials. In this article, the application of an open-ended hollow coaxial cable resonator (OE-HCCR) as a 1-D inclinometer for tilt measurements with 110 nanoradian (nrad) resolution is proposed and demonstrated. The coaxial cable resonant structure is formed between a metal post welded within the coaxial cable at the RF input end and the open end of the coaxial cable. A metal mass block, suspended in proximity to the open end in parallel is used to construct a pendulum structure, serving as the element responsive to a tilt. When the device is tilted, the distance between the mass block and the open end varies due to the displacement of the suspended pendulum. The change in the gap distance modifies the phase reflection coefficient associated with the open end, causing the resonance frequency of the coaxial cable resonator to change. By tracking the resonance frequency, the coaxial line resonator is effectively used as an inclinometer. The experimental results demonstrated that the novel device has a measurement resolution of 110 nrad over a range of 0-3 milliradians (mrad). Additionally, based on the same principle, a 2-D inclinometer based on two perpendicularly aligned OE-HCCRs, useful for simultaneous tilt measurements in two orthogonal dimensions is demonstrated. The open-ended coaxial cable resonator-based inclinometer holds several advantages, including high resolution, robustness, cost effectiveness, ease of signal interrogation, and user-configurable sensitivity and dynamic range.
21 April 2023 in IEEE Sensors Journal
In this paper, we propose and demonstrate a novel corrosion-resistant, embeddable open-end coaxial cable soil moisture sensor. This microwave resonator is constructed using two reflectors along the coaxial line. The first reflector is a metal post at the signal input end, short-circuiting the inner conductor to the outer conductor. The second reflector comprises a welded metal plate parallel to the open-end of the coaxial line, maintaining a fixed gap. A moisture-sensitive Polyvinyl Alcohol (PVA) film is inserted into this gap. The resonance frequency of the open-end coaxial cable resonator is highly dependent on the fringe capacitance, which varies with soil moisture levels. As such, tracking resonance frequency changes allows for correlation with soil moisture fluctuations. We provide a detailed discussion of the embeddable open-end microwave coaxial cable resonator (EOE-MCCR) mathematical model and a proof of concept for soil moisture measurement. The demonstration experiments investigate soil moisture content ranging from 4% to 24%. The prototype device exhibits a soil moisture measurement sensitivity of 0.76MHz/% for soil moisture between 4% and 10%, and 1.44MHz/% for soil moisture between 10% and 24%. The soil moisture sensor presented here is robust, easy to manufacture, chemically resistant, low-cost, and suitable for long-term applications and potential industrial uses. This innovative sensor is ideal for sensing applications in harsh environments, advancing the field of chemical trace sensing.
17 June 2022 in IEEE Transactions on Instrumentation and Measurement
This article reports a novel self-compensated inclinometer with a wide dynamic range and high measurement resolution based on two hollow coaxial cable Fabry–Perot resonators (HCC-FPRs). The HCC-FPR is formed between a metal post that shorts the inner conductor and the outer conductor of the HCC and the water level inside the HCC. Changes in tilt angles result in variations of the water level in the HCC, leading to changes in the cavity length of the HCC-FPR. By tracking the shift of the resonance wavelength of the HCC-FPR, a single HCC-FPR can be used as a sensor device for tilt measurements. Furthermore, two HCC-FPRs are used in the inclinometer design presented herein, which enables the inclinometer to achieve self-compensation for variations of environmental factors, e.g., temperature. The tilt measurement sensitivity of the double-HCC-FPR-based inclinometer is also increased. The proposed inclinometer holds several advantages, such as robustness, ease of fabrication, ease of signal interrogation, low cost, and high measurement sensitivity and resolution.
25 November 2021 in IEEE Sensors Journal
This paper reports a novel extrinsic Fabry-Perot interferometer (EFPI)-based fiber optic sensor for force measurement. The prototype force sensor consists of two EFPIs mounted on a stainless steel rectangular frame. The primary sensing element, i.e., the first EFPI, is formed between the endface of a horizontally-placed optical fiber and a stainless steel buckled beam. The second EFPI, fashioned between a longitudinally-placed optical fiber and a silver-coated glass beam, is arranged to demonstrate the amplification mechanism of the buckled beam structure. When the sensor is subjected to a tension force, the pre-buckled beam will deflect backward, resulting in a longitudinal/axial displacement of the pre-buckled beam. The axial displacement is further transferred and amplified to a horizontal/vertical deflection at the middle of the buckled beam, leading to a relatively-significant change in the Fabry-Perot cavity length. A force sensitivity of 796 nm/ ${N}$ (change in cavity length/Newton) is achieved with a low-temperature dependence of $0.005 {N}$ /°C. The stability of the sensor is also investigated with a standard deviation of ± 5 nm, corresponding to a measurement resolution of ±0.0064 N. A simulation is conducted to study the axial displacement and stress distribution of the sensor when it is subjected to a tension load of 250 N. It is demonstrated that the maximum stress of the sensor is tremendously reduced attributed to the buckled design, enabling a long service life cycle of the force sensor. The robust and simple-to-manufacture force sensor has great potential in structural health monitoring, robotics control, and oil/ gas refining systems.
6 March 2024 in IEEE Sensors Journal
A noncontact liquid level sensor using a cylindrical coplanar waveguide (CCPW) is proposed. The concept is demonstrated using a prototype device made by directly spraying conductive paint on the outer surface of a glass cylinder. The position of the air-liquid interface is measured using the time domain reflection signal from the CCPW. The geometric parameters of the prototype sensor were optimized using a full-wave simulation tool. The experimental results show that the prototype CCPW-based liquid level sensor has a resolution of 29.8 μm over a range of 210 mm at the sweeping frequency bandwidth of 500 MHz - 4 GHz. The tradeoff between the resolution and the measurement range was discussed. The proposed sensor provides a low-cost, easy-to-fabricate, and noncontact method for liquid level measurement, which has potential applications in fuel storage, chemical production, and wastewater treatment.