24 February 2022 in IEEE Robotics and Automation Letters
Autonomous flight of flapping-wing robots is a major challenge for robot perception. Most of the previous sense-and-avoid works have studied the problem of obstacle avoidance for flapping-wing robots considering only static obstacles. This letter presents a fully onboard dynamic sense-and-avoid scheme for large-scale ornithopters using event cameras. These sensors trigger pixel information due to changes of illumination in the scene such as those produced by dynamic objects. The method performs event-by-event processing in low-cost hardware such as those onboard small aerial vehicles. The proposed scheme detects obstacles and evaluates possible collisions with the robot body. The onboard controller actuates over the horizontal and vertical tail deflections to execute the avoidance maneuver. The scheme is validated in both indoor and outdoor scenarios using obstacles of different shapes and sizes. To the best of the authors’ knowledge, this is the first event-based method for dynamic obstacle avoidance in a flapping-wing robot.
2 February 2021 in IEEE Robotics and Automation Letters
The development of automatic perception systems and techniques for bio-inspired flapping-wing robots is severely hampered by the high technical complexity of these platforms and the installation of onboard sensors and electronics. Besides, flapping-wing robot perception suffers from high vibration levels and abrupt movements during flight, which cause motion blur and strong changes in lighting conditions. This letter presents a perception dataset for bird-scale flapping-wing robots as a tool to help alleviate the aforementioned problems. The presented data include measurements from onboard sensors widely used in aerial robotics and suitable to deal with the perception challenges of flapping-wing robots, such as an event camera, a conventional camera, and two Inertial Measurement Units (IMUs), as well as ground truth measurements from a laser tracker or a motion capture system. A total of 21 datasets of different types of flights were collected in three different scenarios (one indoor and two outdoor). To the best of the authors' knowledge this is the first dataset for flapping-wing robot perception.
17 March 2021 in IEEE Access
This paper presents an asynchronous event-based scheme for automatic intrusion monitoring using Unmanned Aerial Systems (UAS). Event cameras are neuromorphic sensors that capture the illumination changes in the camera pixels with high temporal resolution and dynamic range. In contrast to conventional frame-based cameras, they are naturally robust against motion blur and lighting conditions, which make them ideal for outdoor aerial robot applications. The presented scheme includes two main perception components. First, an asynchronous event-based processing system efficiently detects intrusions by combining several asynchronous event-based algorithms that exploit the advantages of the sequential nature of the event stream. The second is an off-line training mechanism that adjusts the parameters of the event-based algorithms to a particular surveillance scenario and mission. The proposed perception system was implemented in ROS for on-line execution on board UAS, integrated in an autonomous aerial robot architecture, and extensively validated in challenging scenarios with a wide variety of lighting conditions, including day and night experiments in pitch dark conditions.
26 August 2024 in IEEE Robotics and Automation Letters
Vision-based perception systems are typically exposed to large orientation changes in different robot applications. In such conditions, their performance might be compromised due to the inherent complexity of processing data captured under challenging motion. Integration of mechanical stabilizers to compensate for the camera rotation is not always possible due to the robot payload constraints. This paper presents a processing-based stabilization approach to compensate the camera's rotational motion both on events and on frames (i.e., images). Assuming that the camera's attitude is available, we evaluate the benefits of stabilization in two perception applications: feature tracking and estimating the translation component of the camera's ego-motion. The validation is performed using synthetic data and sequences from well-known event-based vision datasets. The experiments unveil that stabilization can improve feature tracking and camera ego-motion estimation accuracy in 27.37% and 34.82%, respectively. Concurrently, stabilization can reduce the processing time of computing the camera's linear velocity by at least 25%. Code is available at https://github.com/tub-rip/visual stabilization.