26 November 2019 in Science Signaling
A database provides information on the relative abundances and locations of human proteins that are predicted to be secreted.
7 May 2022 in Biotechnology and Bioengineering
In this study, we demonstrated the first, to our knowledge, integrated continuous bioprocess (ICB) designed for the production of acid‐sensitive monoclonal antibodies, prone to aggregate at low pH, on pilot scale. A high cell density perfusion culture, stably maintained at 100 × 106 cells/ml, was integrated with the downstream process, consisting of a capture step with the recently developed Protein A ligand, ZCa; a solvent/detergent‐based virus inactivation; and two ion‐exchange chromatography steps. The use of a mild pH in the downstream process makes this ICB suitable for the purification of acid‐sensitive monoclonal antibodies. Integration and automation of the downstream process were achieved using the Orbit software, and the same equipment and control system were used in initial small‐scale trials and the pilot‐scale downstream process. High recovery yields of around 90% and a productivity close to 1 g purified antibody/L/day were achieved, with a stable glycosylation pattern and efficient removal of impurities, such as host cell proteins and DNA. Finally, negligible levels of antibody aggregates were detected owing to the mild conditions used throughout the process. The present work paves the way for future industrial‐scale integrated continuous biomanufacturing of all types of antibodies, regardless of acid stability.
17 September 2019 in mAbs
As reported here, we developed and optimized a purification matrix based on a Protein A-derived domain, ZCa, displaying calcium-dependent antibody binding. It provides an alternative to the acidic elution conditions of conventional Protein A affinity chromatography for purification of sensitive antibodies and other Fc-based molecules. We describe the multimerization of ZCa to generate a chromatography resin with higher binding capacity. The highest order multimeric variant, ZCaTetraCys, demonstrated a considerably high dynamic binding capacity (35 mg IgG/ml resin) while preserving the specificity for IgG. High recovery was obtained and host cell protein and DNA content in purified fractions proved to be comparable to commercial MabSelect SuRe and MabSelect PrismA. Various elution conditions for use of this domain in antibody purification were investigated. The purification data presented here revealed variations in the interaction of different subclasses of human IgG with ZCaTetraCys. This resulted in diverse elution properties for the different IgGs, where complete elution of all captured antibody for IgG2 and IgG4 was possible at neutral pH. This optimized protein ligand and the proposed purification method offer a unique strategy for effective and mild purification of antibodies and Fc-fusion proteins that cannot be purified under conventional acidic elution conditions due to aggregation formation or loss of function.
1 January 2021 in Journal of Chromatography A
The manufacturability of therapeutic monoclonal antibodies is limited by the harsh conditions that antibodies are subjected to during the purification procedure, which in turn restricts the development of novel acid-sensitive antibodies. The gold standard for antibody purification, Protein A affinity chromatography, offers the selective capture of antibodies with great yields, but also poses a threat to the quality of the antibodies. Antibodies and Fc-fusion proteins risk forming aggregates as a consequence of the acidic elution from the Protein A ligands, compromising the potency and safety of the drug. Here, we present a novel, mild purification strategy based on a calcium-dependent ligand derived from Protein A, called ZCa. Antibodies captured on a high-capacity tetrameric ZCa resin in the presence of calcium can be eluted by removing the calcium ions through the addition of a chelator, and we describe the strive to find a sustainable alternative to the previously applied chelator EDTA. The naturally occurring chelator citrate is shown to seamlessly replace EDTA. Further buffer optimization reveals that the elution can be considerably improved by increasing the conductivity through the addition of 300 mM sodium chloride, leading to a very concentrated eluate. Remarkably, merely sodium chloride at a concentration of 50 mM is proven to be sufficient for calcium-dependent antibody release in a cost-efficient manner. Antibodies of subclasses IgG2 and IgG4 are eluted with sodium chloride at neutral pH and IgG1 at pH 6, due to varying affinities for the tetrameric ZCa, ranging between 90-780 nM. The mild elution of an IgG4 antibody eliminated the formation of aggregates, which constituted as much as 34% of all eluted antibody from MabSelect SuRe at pH 3. This novel purification strategy thus combines the valuable qualities of a Protein A resin, by providing high selectivity and a recovery of 88-99%, with an exceptionally mild elution step similar to ion-exchange chromatography, rendering considerably more functional antibody.
26 February 2023 in Journal of Chromatography A
The emerging formats of antibody fragments for biotherapeutics suffer from inadequate purification methods, delaying the advances of innovative therapies. One of the top therapeutic candidates, the single-chain variable fragment (scFv), requires the development of individual purification protocols dependent on the type of scFv. The available approaches that are based on selective affinity chromatography but do not involve the use of a purification tag, such as Protein L and Protein A chromatography, require acidic elution buffers. These elution conditions can cause the formation of aggregates and thereby greatly compromise the yield, which can be a major problem for scFvs that are generally unstable molecules. Due to the costly and time-consuming production of biological drugs, like antibody fragments, we have engineered novel purification ligands that elute the scFvs in a calcium-dependent manner. The developed ligands are equipped with new, selective binding surfaces and were shown to efficiently elute all captured scFv at neutral pH with the use of a calcium chelator. Further, two of three ligands were proven not to bind to the CDRs of the scFv, indicating potential for use as generic affinity ligands to a range of different scFvs. Multimerization and optimization of the most promising ligand led to a 3-fold increase in binding capacity for the hexamer compared to the monomer, in addition to highly selective and efficient purification of a scFv with >95% purity in a single purification step. This calcium-dependent ligand could revolutionize the scFv industry, greatly facilitating the purification procedure and improving the quality of the final product.