Ernso Fenelon

Ernso Fenelon

Auto-generated profile, based on publicly available information

Ernso Fenelon

Centre de Recherche Interdisciplinaire Pour la Vulgarisation Agricole et le Développement Local (CREIVADEL)

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2022 in Adsorption Science & Technology
Verified
Journal Article
Open access
PDF file
ANAchmad Chusnun Niam
Achmad Chusnun Niam
EFErnso Fenelon
Ernso Fenelon
ENErlinda Ningsih
Erlinda Ningsih
YMYustia Wulandari Mirzayanti
Yustia Wulandari Mirzayanti
EKEka Kristanti
Eka Kristanti
Heavy metal wastewater pollution has become an environmental and industrial challenge worldwide. Hexavalent chromium (Cr(VI)) is one of the most common forms of chromium metal. Hexavalent chromium pollution is a concern because it was hazardous and can accumulate in the tissues of living organisms and the environment. The adsorption method using activated carbon can be one of the methods to treat hexavalent chromium waste. This study selected Samanea saman as the activated carbon because it contains hemicellulose, lignocellulose, and lignin, which are the requirements for an excellent activated carbon. The study’s objective is to analyze Samanea saman activated carbon (SSAC) to remove hexavalent chromium, measure the adsorption capacity, and determine the appropriate type of adsorption isotherm layer based on the maximum [ ] and minimum [ ] values. The process of making activated carbon was activated using K2CO3 through a pyrolysis process and using batch adsorption. The SEM results as characterization of SSAC depicted that the high pore was well developed. The optimal conditions for Samanea saman indicated high efficiency toward hexavalent chromium ions within the following process parameters; pH value 5, adsorbent dosage 5 g, and initial concentration 20 mg/L. The findings demonstrate that SSAC leads to the removal efficiency of hexavalent chromium being 99.90%, with the greatest adsorption capacity of 0.8949 mg/g. Based on the maximum [ ] and minimum [ ] values, the most suitable adsorption isotherm model in SSAC was the Freundlich isotherm existing in the monolayer ([ ]). The experimental results demonstrated that adsorption of Cr(VI) was well performed by SSAC. Thus, the SSAC material is an appropriate adsorbent for the removal of hexavalent chromium in the water and has the potential to be industrial applied.

1 January 2022 in Journal of Nanomaterials
Verified
Journal Article
Open access
PDF file
EFErnso Fenelon
Ernso Fenelon
ANAchmad Chusnun Niam
Achmad Chusnun Niam
YWYa-Fen Wang
Ya-Fen Wang
SYSheng-Jie You
Sheng-Jie You
The new catalyst (La/Bi2S3) applies for the photodegradation of Acid Yellow 42 (AY42) dye under visible light in this study. The La/Bi2S3 material is the motivating catalyst due to the excellent ability of Lanthanum (La) to increase the adsorption capacity and electron‐hole separation of Bi2S3 for enhancing the degradation of AY42. The characterization analysis of the prepared material confirms a successful synthesis using the hydrothermal method. The efficiency of photodegradation AY42 using La/Bi2S3 is higher than pure Bi2S3. La on Bi2S3 (doped at 3%), which is devised on adsorption (40.24%) and photodegradation (51.86%), has the best degradation efficiency (92.1%). The trapping experiment and the analysis of electron spin resonance (ESR) spectra explain that the hydroxyl radical is the most active species in this photocatalytic process due to the total degradation efficiency decreasing from 92.1% to 57.16% by the scavenger using isopropyl alcohol (IPA). The hole (h+) shows its importance in the photodegradation of AY42 by detecting that OH- is the intermediate species. The new material (La/Bi2S3) also shows excellent photostability in the reusability test. Finally, the result confirms that La is a suitable doping metal for Bi2S3 and is interesting for practical application under visible light. The new catalyst (La/Bi2S3) applies for the photodegradation of Acid Yellow 42 (AY42) dye under visible light in this study. The La/Bi2S3 material is the motivating catalyst due to the excellent ability of Lanthanum (La) to increase the adsorption capacity and electron‐hole separation of Bi2S3 for enhancing the degradation of AY42. The characterization analysis of the prepared material confirms a successful synthesis using the hydrothermal method. The photodegradation efficiency of AY42 using La/Bi2S3is higher than pure Bi2S3. The doping of 3% weight of La on Bi2S3 shows the optimum degradation efficiency of 92.1%, devised on adsorption (40.24%) and photodegradation (51.86%). The pure Bi2S3 (46.7%) contains 17.1% of adsorption and 29.6% of photodegradation. The trapping experiment and the analysis of electron spin resonance (ESR) spectra explain that the hydroxyl radical is the most active species in this photocatalytic process due to the total degradation efficiency decreasing from 92.1% to 57.16% by the scavenger using isopropyl alcohol (IPA). The hole (h+) shows its importance in the photodegradation of AY42 by detecting that OH- is the intermediate species. The new material (La/Bi2S3) also shows excellent photostability in the reusability test. Finally, the result confirms that La is a suitable doping metal for Bi2S3 and is interesting for practical application under visible light.

1 January 2023 in Adsorption Science & Technology
Verified
Journal Article
Open access
PDF file
ANAchmad Chusnun Niam
Achmad Chusnun Niam
MSMuhamad Suhar
Muhamad Suhar
EFErnso Fenelon
Ernso Fenelon
The mining and electroplating industries have resulted in the contamination of the environment with heavy metal. This has resulted in a serious threat to the ecological environment and human health due to the presence of copper pollution. To address this issue, extensive efforts have been made to develop effective methods for removing contaminants, particularly heavy metal, and Samanea saman (SS) was selected as precursor production of activated carbon. Therefore, this study is aimed at investigating Samanea saman-activated carbon (SSAC) to remove copper from an aqueous solution. SS was chemically activated by potassium carbonate and carbonized at 600°C for 5 hours, while SSAC was characterized by scanning electron microscopy-energy dispersive X-ray (SEM-EDS), Fourier-transform infrared (FTIR), and proximate tests. Copper adsorption on SSAC was evaluated by the Langmuir, Freundlich, Langmuir, Freundlich, Redlich-Peterson, Harkin-Jura, and Jovanovic models. Pseudo-first-order, pseudo-second-order, Elovich, and intraparticle diffusion models were used to identify adsorption process mechanism. SEM-EDS results presented that the pore of SSAC was heterogeneous, irregular in shape, and mesopore. In addition, FTIR analysis identified the main functional groups present in SSAC as C-H, C-O-C, and C-O. The proximate test conducted on SSAC determined the water content, volatile matter, ash content, and fixed carbon to be 0.61%, 22.26%, 9.77%, and 67.97%, respectively. The results showed that SSAC exhibited exceptional performance with copper removal efficiency of 99.49% under an adsorbent mass of 0.25 g, a reaction time of 30 minutes, and a concentration of 10 mg/L. Isotherm adsorption of SSAC followed the Redlich-Peterson model with an adsorption capacity (Qm) of 0.663 mg/g, correlation value () of 0.9992, and pseudo-second-order pattern . Therefore, SSAC can be proposed as a potential and economical biomaterial to treat heavy metal in wastewater.

20 January 2023 in Journal of Chemistry
Verified
Journal Article
Open access
PDF file
EFErnso Fenelon
Ernso Fenelon
ANAchmad Chusnun Niam
Achmad Chusnun Niam
TNTruc-Mai Thi Nguyen
Truc-Mai Thi Nguyen
YLYing-Fu Lin
Ying-Fu Lin
YWYa-Fen Wang
Ya-Fen Wang
SYSheng-Jie You
Sheng-Jie You
The dye contamination of water is a global concern in the environment. In this study, the photocatalytic technology and membrane module were combined to improve the surface distribution of the active species of the catalyst for better degradation of the methylene blue (MB) dye under visible light. ZnSn(OH)6 was chosen due to carbons complex metal oxide doped to facilitate the application under visible light. The numerous characterizations were analyzed in the composites to verify the consistency of the optimum degradation of MB over the catalyst coated on the membrane. During the preparation of the ZnSn(OH)6 composite, the results confirmed that different reaction times and amounts of sodium hydroxide significantly affected the pollutants degradation. The carbon-doped composite denoted the largest surface area and increased the catalysts reactive sites on the membrane. The photocatalytic activity test showed that 1 carbon doped on ZnSn(OH)6 prepared at 160°C by hydrothermal method coated on the membrane had the optimal degradation of 89.74 of MB. This study contributes to the ongoing study and development of photocatalytic membranes for the photodegradation of wastewater treatment.