28 February 2023 in IEEE Transactions on Intelligent Transportation Systems
It is expected that the future intelligent transportation system will be endowed with the sensing ability to cope with the complex road environment. Therefore, the integrated sensing and communications (ISAC) system can complement the development of intelligent transportation. In this work, a novel reconfigurable intelligent surface (RIS)-aided ISAC system is investigated, in which an RIS reflects signals to the vehicle target and user by creating a directional path to enhance sensing and communication performance. We are interested in the joint robust design of transmitted beamformer at the dual-functional radar-communication (DFRC) base station and phase-shift at the RIS to maximize the radar mutual information subject to user achievable rate constraint under imperfect angles knowledge and channel state information (CSI). Specifically, two CSI error models, namely, the bounded and the mixed bounded-moment error models, are considered. Then, a worst-case robust (WCR) beamforming problem, as well as a mixed chance-constrained and worst-case robust (MCWR) beamforming problem, are separately formulated. Furthermore, we develop two efficient methods to convert the formulated semi-infinite constraint problems into feasibility ones, and an alternate optimization framework is proposed to obtain stationary points of the original problems. Simulation results are provided to validate the effectiveness of the proposed transformation methods and solution.
14 December 2021 in IEEE Transactions on Vehicular Technology
This paper explores the near-field regional target localization problem with the reconfigurable intelligent surface (RIS) assisted system. Traditional near-field localization strategies typically estimate the position of the target through line-of-sight (LOS) signals transmitted from the anchor node. In practice, accurate location estimation is a challenging issue when the LOS link between the anchor node and target may be unavailable due to the obstacle. To this end, this paper investigates the possibility to confirm the position of the target node consisted in an area of interest (AOI) by retrieving information from the RIS reflection signals. Specifically, we establish a general framework for RIS-assisted regional localization, which consists of RIS phase design and position determination. By defining the average localization accuracy (ALA) of the AOI, we first present a discretization method to design the RIS phase. Then, a robust phase design problem is formulated via transforming the AOI into an uncertainty model of position parameters, and an efficient iterative entropy regularization (IER)-based algorithm is proposed to solve it. Using the designed RIS phase, we develop a near-field target localization algorithm and discuss the power optimization problem for the RIS-assisted localization system (RALS). Numerical results demonstrate the effectiveness of the proposed framework, in which both phase design strategies almost coincide with the optimal RIS phase, and the proposed localization method can attain the near-optimal localization performance by applying the designed RIS phase schemes.
1 August 2017 in IEEE Internet of Things Journal
This paper studies a simultaneous wireless information and power transfer system with a helping relay in wireless body area network, where the relay harvests energy from the radio-frequency signals sent by other nodes, then the relay uses the harvested energy to help transmit energy to the destination and forward information to the source, respectively. Compared with the existing protocols, we propose the dynamic time allocation strategy in this paper. First, based on power splitting (PS) and time switching (TS) transmission protocols, we propose two new transmission protocols, where the transmission time slots are unequal allocation. Then the optimal strategy to achieve the maximum information throughput by solving nonlinear programming problems is presented. And by changing the relay position, the optimal time and power ratios for the best system performance are presented. Finally, the fitting curves of the optimal solutions for different relay positions are plotted. Numerical results show that our proposed optimal strategy can achieve the best throughput performance and the protocol based on TS outperforms slightly than the protocol based on PS.
29 December 2017 in IEEE Internet of Things Journal
In this paper, a relay selection protocol for energy harvesting wireless body area network with buffer is proposed, that considers both the energy of relay nodes and channel state information. The relay node harvests energy from the received radio-frequency signals, then the relay node consumes the harvested energy to transmit information to the destination node. In the proposed relay selection protocol, the relay with the most energy is selected to receive information, the relay with the best relay-destination channel is selected from candidate relays for transmission. The proposed protocol can mitigate the risk of inappropriate relay selection due to channel mismatch problem and avoid the overuse of the same relay. The outage probability is used to measure the system performance. We investigate the outage probability of the optimal relay selection protocol in the time switching and power splitting schemes, respectively. Numerical results show that the proposed protocol significantly outperforms conventional relay selection protocols.
21 August 2019 in IEEE Transactions on Vehicular Technology
In backscatter communication (BackCom) systems, the system performance is susceptible to the double fading channels, which is different from traditional communication systems. In this paper, we investigate the capacity performance of BackCom systems via multiple tags, where the tag corresponding to the maximum signal-to-noise ratio (SNR) is selected to combat the double fading. Although the exact ergodic capacity does not admit a closed-form expression, we derive its approximation by exploiting the extreme value theory, which shows that the capacity scales as loglog ${N}$ with ${N}$ denoting the number of tags. Simulation results confirm the tightness of the approximate ergodic capacity, and the correctness of the capacity scaling law.
26 June 2023 in IEEE Transactions on Vehicular Technology
In this paper, we study the task offloading problem on mobile edge in vehicular networks. Specifically, we take computational resource constraints into consideration, and aim to simultaneously reduce latency and energy consumption. For this purpose, we establish an offloading model that consists of local edge computing resources, edge server resources of both macro and subsidiary base stations, as well as cloud computing server resources. Each task can be offloaded through one of five strategies, and is evaluated via a loss function determined by its latency and energy consumption. Based on this model, our goal is to solve a mixed-integer non-linear optimization problem (MINLP) whose objective function is the weighted sum of the task-specific loss functions. To address this optimization problem, we split it into two sub-problems, referred to as resource allocation and offloading strategy. We develop a method based on Block Coordinate Descent technique combining convex optimization and Gray Wolf algorithm (BCD-CONGW) that alternatively solves the two sub-problems, until convergence. The former sub-problem is convex and can be solved in polynomial time, whereas the latter is non-convex and hence NP-hard. For the latter, we relax discrete variables and employ Gray Wolf algorithm with elite strategy to approximate its optimal point. By numerical evaluations, we show that our method outperforms existent methods in terms of latency and energy consumption.