1 January 2011 in International Journal of Surface Science and Engineering
Laser surface hardening (LSH) is one of the most widely used surface hardening process which can be applied to almost the whole range of metallic materials in today's applications. Laser beam is focused to the localised region for hardening the required portion of the material. High intensity laser radiation is involved for heating the surface of steel into the austenitic region. Steep temperature gradient arises, due to high rates of heat transformation that results in instant cooling by conduction. It causes the phase conversion from austenite to martensite without the need for external quenching. Among various types of lasers, CO
1 September 2012 in Transactions of the Canadian Society for Mechanical Engineering
GBGengusamynaidu Buvanashekaran
Gengusamynaidu Buvanashekaran
An experimental investigation with Nd:YAG laser system was carried out to study the effects of laser hardening process parameters on the microstructure and hardness during laser hardening of EN25 steel. The laser beam is allowed to scan on the surface of the work piece by varying the laser beam power (750–1250 W) and travel speed (500–1000 mm/min) of the work table. The microstructural features of the laser hardened EN25 steel were analysed using optical microscope. The microstructure of the surface layer was found to consist of plate martensite. A substantial increase in surface hardness was achieved, by a factor of 2 times the base material hardness.
10 October 2014 in The International Journal of Advanced Manufacturing Technology
1 December 2018 in Experimental Thermal and Fluid Science
8 February 2016 in Metallurgical and Materials Transactions B