10 June 2020 in Journal of The Royal Society Interface
Calcific aortic valve disease (CAVD) is the most common valvular heart disease in the aging population, and is now believed to be a slow, progressive, yet actively regulated process. The disease progression can be divided into two phases: initiation phase associated with lipid deposition and inflammation response, and the later propagation phase with active calcification growth. It has been hypothesized that elevated mechanical stress plays a major role in both phases of disease progression. In order to identify a direct link between leaflet stress and calcification development, we performed patient-specific finite-element (FE) analyses of six bicuspid aortic valves (BAV), where the leaflets, raphe and calcifications were all considered. The results showed that during the initiation phase, calcium buildup is likely to occur along the leaflet-root attachment curve (ATC), and the commissures, which are subject to the most drastic changes in stress during the cardiac cycle. During the propagation phase, the presence of calcification would lead to local stress concentration along its boundary, hence further calcification growth. Three patterns of calcification formation were identified on BAV leaflets: ‘radial’, which extended radially from ATC into the leaflet belly region; ‘commissure to commissure’, which extended circumferentially along the coaptation; and ‘raphe’, which located in the vicinity of the raphe. Furthermore, we found a strong correlation between regions with a high risk of calcium buildup and regions with elevated mechanical stress. The high-risk regions predicted at diastole on the non-calcified leaflet from FE models agreed reasonably well with the in vivo calcification locations, which indicates that patient-specific FE modelling could help us to evaluate the potential risk of calcification formation in the early stage of CAVD.
13 December 2019 in International Journal for Numerical Methods in Biomedical Engineering
11 July 2023 in IEEE Transactions on Medical Imaging
Automated volumetric meshing of patient-specific heart geometry can help expedite various biomechanics studies, such as post-intervention stress estimation. Prior meshing techniques often neglect important modeling characteristics for successful downstream analyses, especially for thin structures like the valve leaflets. In this work, we present DeepCarve (Deep Cardiac Volumetric Mesh): a novel deformation-based deep learning method that automatically generates patient-specific volumetric meshes with high spatial accuracy and element quality. The main novelty in our method is the use of minimally sufficient surface mesh labels for precise spatial accuracy and the simultaneous optimization of isotropic and anisotropic deformation energies for volumetric mesh quality. Mesh generation takes only 0.13 seconds/scan during inference, and each mesh can be directly used for finite element analyses without any manual post-processing. Calcification meshes can also be subsequently incorporated for increased simulation accuracy. Numerous stent deployment simulations validate the viability of our approach for large-batch analyses. Our code is available at https://github.com/danpak94/Deep-Cardiac-Volumetric-Mesh .
19 February 2024 in Computers in Biology and Medicine
3 April 2020 in Structural Heart
: Mitral regurgitation (MR) is present in a large proportion of patients who undergo transcatheter aortic valve replacement (TAVR). However, existing clinical data on the impact of TAVR on early po...