10 April 2024 in IEEE Transactions on Aerospace and Electronic Systems
By adopting the transmit minimum redundancy array (MRA) in frequency diverse array multiple-input multiple-output (FDA-MIMO), extra degrees-of-freedom (DOFs) in the transmit spatial domain can be obtained owing to enlarged virtual elements. In this paper, an interference suppression method is developed with the MR-FDA-MIMO radar using data-dependent beamforming based on virtual samples. In our designed method, both the transmit and receive beamforming are explored via a two-stage approach, including: i) at the receive beamforming stage, sidelobe interferences are firstly mitigated with minimum variance distortionless response (MVDR)-based beamforming after blocking the true target and mainlobe interferences. ii) at the transmit beamforming stage, the samples from the physical array are divided into multiple subsets, while a difference co-array procedure is applied to each subsets and multiple virtual samples are obtained to construct the interference-plus-noise covariance matrix. Furthermore, such a matrix is reconstructed based on the Capon spectrum. In Addition, the errors for both the virtual samples and virtual covariance matrix are analyzed. The proposed approach outperforms the traditional sparse smooth strategies in terms of suppressible interference number regardless of the number of physical array element. The effectiveness of the proposed method for interference suppression is verified through numerical simulations.
18 May 2023 in IEEE Transactions on Aerospace and Electronic Systems
In the conventional array radar, the suppressible interference is generally limited by the array element number which is referred to as the degree-of-freedom (DOF) of the array. Similarly, the suppressible number of deceptive interference is limited by the transmit element number of frequency diverse array (FDA) multiple-input multiple-output (MIMO) radar. In this paper, an interference suppression method based on data-independent beamforming is proposed with FDA-MIMO radar by using minimum redundancy array (MRA) design in its transmit port, referred to as MR-FDA-MIMO radar. This breakthroughs the limitation on the number of suppressible deceptive interferences. The MRA is employed to obtain extended DOF by using difference co-array, resulting in suppressible number of order O(2M) with M transmit element number. The beamforming method consists of two manifolds: i) in the receive beamforming stage, the possible target is preserved by using orthogonal subspace projection and the sidelobe barrage interference is suppressed; ii) in the equivalent transmit beamforming stage, possible non-ideal factors are taken into consideration for constructing the covariance matrix to widen the notches corresponding to the predicted deceptive interference. The proposed method outperforms in terms of number of the suppressible deceptive interferences and the signal-to-interference-plus-noise ratio, which is demonstrated with simulation examples.
1 January 2025 in Signal Processing