12 September 2014 in IEEE Communications Magazine
The exponential increase of mobile data traffic requires disrupting approaches for the realization of future 5G systems. In this article, we overview the technologies that will pave the way for a novel cellular architecture that integrates high-data-rate access and backhaul networks based on millimeter-wave frequencies (57-66, 71-76, and 81-86 GHz). We evaluate the feasibility of short- and medium-distance links at these frequencies and analyze the requirements from the transceiver architecture and technology, antennas, and modulation scheme points of view. Technical challenges are discussed, and design options highlighted; finally, a performance evaluation quantifies the benefits of millimeter- wave systems with respect to current cellular technologies.
6 September 2019 in IEEE Transactions on Antennas and Propagation
We present novel three-layer D-band linearly-polarized transmitarrays entirely fabricated using standard printed circuit board (PCB) processes. Three flat lenses comprising 1600 elements are designed to generate broadside and scanned beams. All lenses are synthesized using 8 unit cells (3-bit phase quantization). The combination of cells comprising probe-fed and aperture-coupled patches is proposed to overcome the design challenges due to technological constraints and achieve a wideband operation. The minimum design feature is 80 μm. The trade-offs in the design of the feed illumination are analyzed using adhoc numerical tools. A 10-dBi horn is eventually selected as source. The focal-to-diameter (F=D) ratio is 0.75 for all lenses. The broadside array attains a peak gain of 33.0 dBi and a -1-dB relative gain bandwidth of 11.7%, i.e. wider than that of state-of-the-art designs, in the 100-300-GHz band, which use more complex technologies and larger focal distances. The performance of the proposed antenna technology demonstrates its potential for low-cost high-capacity wireless backhauls beyond 100 GHz.
4 June 2014 in IEEE Transactions on Nanotechnology
GLGerhard Martin Landauer
The present paper provides an accurate drift-diffusion model of the graphene field-effect transistor (GFET). A precise yet mathematically simple current-voltage relation is derived by focusing on device physics at energy levels close to the Dirac point. With respect to previous work, our approach extends modeling accuracy to the low-voltage biasing regime and improves the prediction of current saturation. These advantages are highlighted by a comparison study of the drain current, transconductance, output conductance, and intrinsic gain. The model has been implemented in Verilog-A and is compatible with conventional circuit simulators. It is provided as a tool for the exploration of GFET-based integrated circuit design. The model shows good agreement with measurement data from GFET prototypes.
1 July 2015 in IEEE Journal of Solid-State Circuits
This paper presents an original mmW frequency multiplier that provides the channel center frequencies of the IEEE 802.15.3c standard from a much lower and fixed frequency of 2.16 GHz. It is composed of a voltage-controlled oscillator (VCO) whose supply is periodically switched on-and-off by the input signal, providing Periodically Repeated Oscillations Train (PROT). This multi-harmonic signal is injected into an oscillator (ILO) that locks onto the harmonic of interest, providing a continuous wave sinusoidal signal in the 60 GHz band. The CMOS 40 nm circuit consumes 32 mW and occupies only 0.07 mm 2 . A theoretical approach on the synchronization of the PROT signal generator and the ILO is proposed, based on custom approximated solutions of the Van der Pol oscillator and highlighting new synchronization phenomena. Based on this theory, this novel programmable multiplication technique requires a unique fixed low frequency reference to perform multi-channel mmW LO generation. The phase noise of the output LO signal is only limited by the input low frequency reference phase noise and the frequency ratio between the output and the input signals. Thus, a 60 GHz signal has been generated with this technique with a record phase noise of -104 dBc/Hz@1 MHz offset.
28 April 2016 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Optical interconnects for system-in-package applications can be designed for various bit rates. In this paper, an optimization study is conducted to find the optimal parameters for electrooptical links, based on a silicon photonic technology. We focus on the bit rate to achieve highest possible power efficiencies. This paper takes all the elements of an electrooptical link into account: serialization stage, ring-resonator-based modulator, thermal stabilization, modulator driver, laser, receiver, deserialization stage, and clock-phase generation. The optimization is based on a simulation-supported database for single-ended transimpedance amplifiers (TIAs). For all the other, elements of the link simulation-based power consumption models are presented. Furthermore, an analytical solution for the TIA bandwidth and bit rate relationship is derived based on the system jitter, the TIA noise, transimpedance, bandwidth and minimal output swing, and the available input signal. Optimal bit rates are derived and discussed for a 65-nm CMOS and a 28-nm fully depleted silicon-on-insulator technology. We found that the optimal bit rates increase with more aggressive technology scaling and smaller photodiode capacitances, but decrease if lower static power consumptions can be achieved (e.g., by efficient thermal tuning of ring-resonator modulators). We conclude that further research should aim for lower tuning powers instead of higher speed.
24 October 2023 in IEEE Transactions on Microwave Theory and Techniques
We present two high-efficiency baseband (BB)-to- D -Band transmitting systems based on a novel channel-aggregation architecture. They comprise a first integrated circuit (IC) for channel aggregation at intermediate frequency (IF) and a two-channel 45-nm CMOS transmitter (TX) flip-chipped on antenna-in-package (AiP), which illuminates a high-gain flat lens antenna in standard printed circuit board technology. The two signals emitted by the active antenna module, in adjacent bands, are aggregated over the air and collimated by the flat lens. Two TXs using a standard and a folded transmitarray antenna (TA), three times thinner than the former one, are realized and compared. They achieve similar performance in the operating band (139.3–156.6 GHz), with a measured peak effective isotropic radiated power (EIRP) of 30 dBm. A wireless point-to-point link is demonstrated with the proposed transmitting system and a commercial receiver. A data rate (DR) of 57.6 Gb/s is measured at 1 m using eight channels and a 16-quadrature amplitude modulation (QAM) scheme, with an energy efficiency of 27.4 pJ/b.