3 November 2023 in Science
Controlling heat flow is a key challenge for applications ranging from thermal management in electronics to energy systems, industrial processing, and thermal therapy. However, progress has generally been limited by slow response times and low tunability in thermal conductance. In this work, we demonstrate an electronically gated solid-state thermal switch using self-assembled molecular junctions to achieve excellent performance at room temperature. In this three-terminal device, heat flow is continuously and reversibly modulated by an electric field through carefully controlled chemical bonding and charge distributions within the molecular interface. The devices have ultrahigh switching speeds above 1 megahertz, have on/off ratios in thermal conductance greater than 1300%, and can be switched more than 1 million times. We anticipate that these advances will generate opportunities in molecular engineering for thermal management systems and thermal circuit design.
1 August 2018 in Review of Scientific Instruments
Anisotropic thermal properties are of both fundamental and practical interests, but remain challenging to characterize using conventional methods. In this work, a new metrology based on asymmetric beam time-domain thermoreflectance (AB-TDTR) is developed to measure three-dimensional anisotropic thermal transport by extending the conventional TDTR technique. Using an elliptical laser beam with controlled elliptical ratio and spot size, the experimental signals can be exploited to be dominantly sensitive to measure thermal conductivity along the cross-plane or any specific in-plane directions. An analytic solution for a multi-layer system is derived for the AB-TDTR signal in response to the periodical pulse, elliptical laser beam, and heating geometry to extract the anisotropic thermal conductivity from experimental measurement. Examples with experimental data are given for various materials with in-plane thermal conductivity from 5 W/m K to 2000 W/m K, including isotropic materials (silicon, boron phosphide, and boron nitride), transversely isotropic materials (graphite, quartz, and sapphire), and transversely anisotropic materials (black phosphorus). Furthermore, a detailed sensitivity analysis is conducted to guide the optimal setting of experimental configurations for different materials. The developed AB-TDTR metrology provides a new approach to accurately measure anisotropic thermal phenomena for rational materials design and thermal applications.
15 July 2024 in Applied Physics Letters
Wide and ultrawide bandgap semiconductors, such as GaN, play a crucial role in high-power applications, yet their performance is often constrained by thermal management challenges. In this work, we introduce a high-quality interface between GaN and AlN, prepared through wafer-scale bonding and verified via high-resolution transmission electron microscopy and transport experiments. We experimentally measured the thermal boundary conductance of the GaN–AlN interface, achieving up to 320 MW/m2K at room temperature using an ultrafast optical technique and sensitivity examinations. Non-equilibrium atomistic Green's functions and density functional theory simulations were conducted to model the interface phonon modes and their contributions to thermal transport, demonstrating good agreement with the experimental results from 80 to 300 K. Additionally, we observed a size-dependent effect on the thermal boundary conductance related to the GaN film thickness from 180 to 450 nm, which we attributed to quasi-ballistic thermal transport through molecular dynamics simulations. Our study has demonstrated a scalable processing route for wafer-sized chip packaging and provides fundamental insights to mitigate near-junction thermal resistance. Further exploration of interface engineering could facilitate co-design strategies to advanced thermal management technologies.
1 November 2020 in Materials Chemistry and Physics
1 April 2014 in Journal of Luminescence
1 January 2018 in Technology and Health Care
BACKGROUND AND OBJECTIVE: To examine the human visual performance (wavefront aberration) and subjective questionnaire (SQ) of visual fatigue when viewing 2-D and 3-D movies. METHODS: Thirty healthy adults observed 2-D and 3-D movies on the same television from a 3m distances during 2D, 3D-A (with better 3D glasses), and 3D-B (with poorer 3D glasses) viewing conditions. Visual quality index, including modulation transfer function index (MTFI), higher order aberration root mean square (RMS), vertical coma (VC), horizontal coma (HC) and spherical aberration (SA), were assessed before and after each viewing condition. One-way repeated measures ANOVA was performed to assess the changes of each test variable before and after movie viewing. RESULTS: Participants watching movies with 3D-B conditions experienced higher change of MTFI, RMS, VC and HC but smaller SQ, compared with 2D and 3D-A ([ ] 0.05). Additionally, higher MTFI but smaller SQ was found for 3D-A compared with 2D viewing condition ([ ] 0.05). CONCLUSIONS: While prolonged viewing 2-D and 3-D movies would lead to poorer visual performance, 3-D glasses with better quality can play the major role in reducing visual ability for users. The change of human eye wavefront aberration might be useful for the evaluation of visual fatigue in the future.