High-frequency-link (HFL) inverters have drawn a lot of attention, owing to their high transformer utilization factor, bidirectional energy transfer, and easy implementation of soft switching. Therefore, HFL-based topologies might be a promising solution for the next-generation 600-W class microinverter. However, the utilization of HFL structures in split-phase systems, and the ability to operate in both grid-tied and islanded modes are rarely studied. Therefore, a novel single-stage high-frequency-link voltage-source microinverter with a split-phase structure is proposed in this paper. The proposed microinverter can provide a split-phase output voltage to match the single-phase three-wire distribution system. The two-phase output voltages can be balanced naturally without dedicated control. Meanwhile, all switches achieve soft-switching by the proposed secondary-side modulation (SSM) strategy. Owing to the voltage-source-inverter (VSI) feature, the proposed microinverter can be used in both grid-connected and islanded applications, of which the control strategy is also proposed in this paper. Finally, its dual-mode operation is validated via a 600-W/50-Hz prototype, with a peak efficiency of 94.6%.
A phase-shift full-bridge zero-voltage-switching (ZVS) pulse-width-modulated (PWM) converter with commutation capacitor and inductor-capacitor (LC) auxiliary circuit is proposed. This converter contains the advantages of small rectifier voltage oscillation as well as no duty cycle loss, and realises ZVS for all primary switches over a wide load range. In this study, the mechanism of the rectifier voltage oscillation is discussed in detail. The operation principle of the circuit is described and design considerations of the converter are discussed. Finally, the experimental results from a 650 W/28 V, 100 kHz prototype are given to confirm the operation, validity and features of the proposed converter.