The control of mechanical systems are generally applied by using electric motors which are useful for the control of velocity, position and torque. On the other hand, servo motors are preferred due to their characteristic properties for the systems that require more accurate operations. In this study, a mechanical prototype having a two degree of freedom motion capacity integrated with AC servo motors is generated. The control of those AC servo motors is achieved by using an Omron PLC (Programmable Logic Controller). A SCADA program is developed for user control and monitoring. The connection between SCADA and PLC is obtained by using Device-Net web protocol. The velocity and position of the motion control system are monitored with real time animation on the screen. It is observed after the testing of the designed system that the position and velocity values are convenient.
1 January 2017 in Hittite Journal of Science and Engineering
Monitoring and control system is very important for crop development process in agriculture zones. A structure which is carried out based on the type of the product with the knowledge of temperature and humidity values of the agricultural land can contribute to the efficient use of underground water resources. Additionally, it can also contribute to the establishment of the administration of the land besides the economical contributions to the farmer. In this study, the values obtained by heat and humidity sensors which are placed in different locations of agricultural field are transmitted to a database by using a central operation unit. The water requirement based on the product is determined according to that database. Those values are transferred to the smart phones by using a Wi-Fi connection. A real time monitoring system is established on the smart phone. The energy supply of the system is obtained by solar cells. The design offers several advantages such as saving of the water, time and energy with the efficient use of underground water resources. Thus, by using clean energy, the design constitutes an environmental friendly system. Keywords: Underground water; Agriculture zone; Smart phone; Sensor networks DOI: 10.17350/HJSE19030000055 Full Text: Research Article
1 January 2017 in International Journal of Electronics and Electrical Engineering
We present the design, fabrication, and experimental validation of a novel miniature quadruped robot, drawing inspiration from the Ghost Robotics Minitaur platform. This work is primarily motivated by the desire to explore the significant benefits of scale reduction for legged locomotion, including lower cost, enhanced portability, and the ability to operate effectively in constrained environments. Our approach meticulously retains the core mechanical and kinematic features of the original Minitaur, adapting them to a much smaller scale. The robot's development involved integrating 3D-printed structural components (PLA), readily available off-the-shelf micro servos, and an Arduino Pro Mini for control. We specifically addressed key engineering challenges inherent in downscaling, such as achieving a compact chassis design, managing power efficiently within strict weight limits, and implementing robust gait control algorithms, including inverse kinematics for trot gait. Quantitative evaluation of the prototype demonstrates its performance: it successfully operates at a sub-0.5 kg mass, achieves forward speeds of approximately 0.15 m/s, and draws around 1050 mAh at 5 V during continuous motion. A comparative analysis highlights the critical trade-offs when contrasted with the original Minitaur (6 kg, ∼2.0 m/s) and other similar DIY (do-it-yourself) micro-quadrupeds, notably their differing kinematic approaches. Our results conclusively demonstrate that full locomotion capabilities can be successfully retained in a highly compact form factor, representing a significant advancement in the development of more accessible and versatile legged robotic platforms.