26 October 2018 in Scientific Reports
Increased development of wearable sensors for physiological monitoring has spurred complementary interest in the detection of biochemical indicators of health and performance. We report a wearable sensor system for non-invasive detection of excreted human biomarkers in sweat. The system consists of a thin, flexible, kapton patch (2.5 × 7.5 cm) that can be coated with adhesive and affixed to the skin. The system can be controlled by a cell phone via a near-field communications protocol, charged wirelessly, and the data can be downloaded and displayed in a smart phone app. The system is designed such that the sensing element plugs into a low-profile socket, and can easily be removed and replaced as needed due to saturation or aging effects. As a demonstration case, we examined using an organic electrochemical transistor (OECT) within this system to monitor lactate concentration. Several different methods for optimizing the sensor performance were compared, including altering electrode materials, employing various immobilization techniques, and tailoring operating voltages. Resulting functional response of the lactate oxidase enzyme was compared as a function of the sensor variables. The OECT sensor was shown to have high sensitivity to lactate, however the sensing range is limited to lactate concentrations below approximately 1 mM.
20 April 2020 in Journal of Materials Chemistry A
Gel polymer electrolytes (GPEs) hold great promise for next-generation Li-ion batteries as they combine the high ionic conductivity and facile transport properties of liquid electrolytes with the improved safety and mechanical properties of solid polymer electrolytes. The selection of appropriate non-flammable solvents as well as polymer matrices with good electrochemical stability and robustness is a critical step in the design of efficient and safe GPEs. Here, we show that integration of an easy-to-make deep eutectic solvent (DES) based on N-methylacetamide and lithium bis(trifluoromethanesulfonyl)imide, in a versatile acrylate polymer host comprising 2-hydroxyethyl acrylate (HEA) and polyethylene glycol methyl ether acrylate (MPEGA), results in various GPE formulations with improved electrochemical stability compared to the liquid DES alone. At optimized HEA to MPEGA ratios, eutectic GPEs achieve ionic conductivities exceeding 0.4 mS cm−1 and 1.2 mS cm−1 at 20 °C and 40 °C respectively. When tested in Li4Ti5O12/LiMn2O4 full cells, these GPEs outperform the liquid DES at 0.45C rate in terms of cycling stability. More impressively, the eutectic GPEs exhibit substantially improved non-flammability as well as remarkable robustness and stability to water compared to the liquid DES. The self-extinguishing time of the eutectic GPEs when exposed to a flame is suppressed by over a factor of seven. Regarding water stability, while the cycle life of full cells with a liquid DES is dramatically impacted by the presence of water, eutectic GPEs are significantly more tolerant, enabling more stable cycling and even the assembly of cells in fully ambient laboratory conditions. These findings provide useful insights into the design of novel, safe, robust GPEs based on environmentally friendly solvents.
14 October 2019 in Chemical Communications
We report UV-photopolymerized “water-in-bisalt” electrolytes that expand the electrochemical stability window, improving “water-in-bisalt” cycle life in lithium titanate full cells.
1 March 2017 in ACS Applied Materials & Interfaces
24 April 2021 in Journal of Materials Chemistry A
Niobates are promising alternatives to commercial anodes like graphite and Li4Ti5O12 (LTO), featuring high capacity, safe voltage and fast charging.
31 May 2024 in Journal of Materials Chemistry A
Prelithiation of LiMn 2 O 4 balances the low first cycle efficiency of silicon anodes for improvements in energy density and prospective cell chemistry enabled by naturally abundant elements.