28 November 2023 in IEEE Transactions on Instrumentation and Measurement
This work establishes a microscopic fringe projection profilometry (MFPP) system consisting of a bi-telecentric camera and a pinhole Scheimpflug projector to maximize the common focus area between them. Currently phase-height mapping (PHM) and stereoscopy (SV) based calibration approaches are still two representative families. The former generally relies on a precise translation stage accompanied by two separated procedures including the camera parameters calibration and the PHM process, making the calibration task relatively complicated and expensive in terms of required operation and devices. The latter only via a calibration target is relatively simple and low-cost to implement, but its accuracy fails to be guaranteed because it is difficult to undistort the projector by indirectly resorting to the camera. To cope with these issues, we propose a flexible integrated calibration (IC) solution for the especially designed 3D system while maintaining a high measurement accuracy and a low requirement of operation and devices. It implements a pixel-wise Look-Up-Table (LUT) 3D coordinate computation only via a low-cost calibration target. The phase artifacts of the dot target is addressed by phase optimization strategy. Furthermore, an optimization strategy is presented to exclude the measurement errors caused by projector’s distortion and Scheimflug projection structure. The proposed framework effectively simplifies the calibration procedure and reserves the reconstruction accuracy. Theoretical model of the calibration solution is mathematically derived, and rich comparative experiments imply that it is able to obtain an average height error of 7 μm around within the volume of 28 mm×23 mm×5 mm, as well as a standard deviation of plane fitting error better than 5 μm.
1 January 2023 in International Journal of Computational Science and Engineering
Aviation security inspection needs lots of time and human labour. In this paper, we establish a new network for detecting prohibited objects in aeronautic security inspection X-ray images. Objects in the X-ray image often present rotated shapes and overlap heavily with each other. In order to solve the rotation and occlusion in X-ray image detection, we construct the de-rotation-and-occlusion module (DROM), an efficient module that can be embedded into most deep learning detectors. Our DROM leverages the edge, colour and oriented fast and rotated brief (ORB) features to generate an integrated feature map, while the ORB features could be extracted quickly and diminish the deviation produced by rotation effectively. Finally, we evaluate DROM on the OPIXRay dataset; compared with several latest approaches, the experimental results certify that our module promotes the performance of single shot multibox detector (SSD) and obtains higher accuracy, which proves the module's application value in practical security inspection.