In this paper we analyze the radiocarbon (14C) concentration changes over the whole operational period of the Ignalina Nuclear Power Plant (INPP) including the post-shutdown decommissioning. Environmental samples from the vicinity of the INPP and a rural area as background of pine tree rings were analyzed with the single stage accelerator mass spectrometer (SSAMS). The analysis shows the local influence of the INPP from 3 to 7 pMC. The whole time span from 1983 to 2015 is divided into three periods representing the early and late operational and post-shutdown stages of the INPP with different 14C profiles in analyzed samples. The influence of the maintenance of the INPP and radioactive waste management activities are indicated and discussed.
The emergence and widespread distribution of eye fibulae as adornment objects, from the northern provinces of the Roman Empire to northeastern Europe and Scandinavia, as well as their typology have been widely explored. Currently in Lithuania, a total of 209 eye fibulae dating to the 1st and 2nd centuries are known. The geographical distribution, typology and chronology of these Early Roman Period jewelry artifacts do not present any problem. However, the technology of manufacture of these fibulae has been much less studied. The present article analyzes the technology of manufacture of Prussian series eye fibulae, including the previously unknown specific manufacturing techniques, such as the use of wooden axes to modify the construction of the fibula and make it more durable and long lasting. Radiocarbon (14C) dating has unambiguously confirmed that the wooden axes are contemporaneous with the time of the use of the fibulae, while observation under the scanning electron microscope has identified wood species used for making the wooden axes. The X-ray fluorescence spectrometry (XRF) analysis was used to determine the copper alloys, of which eye fibulae were made. The manufacturing technologies of eye fibulae (forging and casting) are discussed in the context of analytical and experimental studies.
The article provides results of the study on retrospective evaluation of 14C pollution from Ignalina Nuclear Power Plant (INPP). Transfer factor approach was applied coupled with the radiocarbon measurements in Scots pine tree rings of extended network of 9 sampling sites around the INPP within the distance of 1.8 – 6.6 km from the INPP ventilation stacks. The measured 14C activity in tree rings suggested the annual airborne release estimate from the INPP to be in the range 0.43 - 11 TBq depending on the lifetime period of INPP which is in good agreement with other studies. The estimated average annual emission factor ranged from about 1 TBq/GWa in early operational years up to about 3 TBq/GWa after 10 years of operation. The reason of this increase being is most probably the accumulation and aging of the graphite stack of INPP RBMK reactors. The last operational decade (1999 – 2009) is characterised by large fluctuations of releases which may be caused by the maintenance and waste management activities at INPP. The trend of last decade of our observations (2009 – 2019) is a continuous decrease of emissions up to 0.5 TBq per year after final shutdown of the reactors in 2009. The study shows high potential of accumulated 14C activity release due to dismantling and decontamination activities during the decommissioning phase of the NPP. The extended sampling site network effectively functioned as an aerial averaging system, reducing the influence of local peculiarities on sampling and modelling. As a result, the overall radiocarbon emissions reconstruction model uncertainty was estimated at approximately of 24%.