Large-diameter thick-walled steel pipes during their installation in deep-water are subjected to external pressure, which may trigger structural instability due to pipe ovalization, with detrimental effects. The resistance of offshore pipes against this instability is affected by local geometric deviations and residual stresses, introduced by the line pipe manufacturing process. In the present paper, the JCO-E pipe manufacturing process, a commonly adopted process for producing large-diameter pipes of significant thickness, is examined. The study examines the effect of JCO-E line pipe manufacturing process on the external pressure resistance of offshore pipes, candidates for deepwater applications using nonlinear finite element simulation tools. The cold bending induced by the JCO forming process as well as the subsequent welding and expansion (E) operations are simulated rigorously. Subsequently, the application of external pressure is modeled until structural instability (collapse) is detected. Both the JCO-E manufacturing process and the external pressure response of the pipe, are modeled using a two-dimensional (2D) generalized plane strain model, together with a coupled thermo-mechanical model for simulating the welding process.
The present paper reports numerical calculations which complement experimental work reported in the companion paper entitled “Experimental Results of Steel Lap Welded Joints in Seismic Conditions”, also presented in ASCE 2018 Pipelines Conference. Nonlinear finite element simulation tools are employed to investigate the bending capacity of internally-pressurized welded-lap 24-in-diameter pipeline joints, considering two thicknesses (0.135 in and 0.250 in). The work presented in this paper: (a) simulates numerically the seven large-scale experiments presented in detail in the companion paper; (b) elucidates some interesting issues of welded lap joint behavior under severe bending deformation. In the final part of the paper, based on the above experimental and numerical results, a discussion is offered on the design of welded lap joints in pipelines constructed in seismic areas.