Sensitivity Amplification Control (SAC) algorithm was first proposed in the augmentation applications of Berkeley Lower Extremity Exoskeleton (BLEEX). The SAC algorithm is widely used in human augmentation applications since it just need the information from the exoskeleton robot, so that the complexity of exoskeleton system can be reduced greatly. However, the SAC algorithm has two main drawbacks: 1) requiring accurate dynamic models of the exoskeleton, 2) can not manage the variation of interaction dynamics from different walking speed. This paper presents a novel developed learning control strategy based on SAC algorithm. In the proposed Adaptive Sensitivity Amplification Control (ASAC) strategy, the reinforcement learning method is utilized to learn the sensitivity factors online for the sake of handling the variation of interaction dynamics. We demonstrate the control efficiency of ASAC on an one degree-of-freedom (DOF) platform with swing movements first, and then extend it into a HUman-powered Augmentation Lower EXoskeleton (HUALEX). The experimental results show that the proposed ASAC strategy can handle the changing interaction dynamics with less interaction force between the pilot and the exoskeleton as compared with traditional SAC algorithm.
Impedance control has been widely developed in the robotic exoskeleton field for human performance assistance and enhancement. However, the determination of desired impedance parameters that dominates the characteristics of interaction force and motion control is not straightforward since these parameters depend not only on the physical properties of the wearer but also on the speed region during locomotion. This paper presents a newly developed control strategy to regulate the desired impedance between a wearable lower exoskeleton and a wearer's limb according to a specific motion speed using a rule-based fuzzy regulator. In this control strategy, the analysis of stability and performance in frequency domain is adopted for designing the fuzzy rule. We have demonstrated the feasibility of the proposed method through a single degree of freedom exoskeleton example that employed swing movements with a chosen operator. Experimental results show that the resulting interaction torque and the human-exoskeleton tracking error are significantly reduced as compared to the traditional impedance control method used for various frequency ranges of leg motion.