19 May 2021 in IEEE Transactions on Magnetics
The three-dimensional physical models for FeNi/Cu/FeNi films with two different types of structures which are linear and meander are developed. The relationship between the impedance of the films and the applied magnetic field or excitation frequency is obtained and the influence of geometric parameters and structures of the films on the giant magnetoimpedance (GMI) effect is analyzed. The result shows that the GMI effect in the film with a horizontal meander structure appears to be much stronger compared with that in a linear structure. The negative mutual inductance of the meander FeNi/Cu/FeNi films reduces the total inductance and decreases frequency response. Meanwhile, the GMI effect and the negative mutual inductance are enhanced by increasing the number of turns or decreasing the space width between each segment. Based on these effects, the FeNi/Cu/FeNi film with a vertical meander structure is proposed and simulated, which reflects the design of the meander structure in the thickness direction. The distance between each segment is reduced to 500 nm. The GMI effect and the negative mutual inductance are greatly enhanced (the maximum value of the GMI ratio increases from 207% to 1247% when the excitation frequency changes from 50MHz to 300MHz). Furthermore, the spatial resolution of the film is further improved. The results obtained could be useful both for a better understanding of the GMI effect of the FeNi/Cu/FeNi film with a meander structure and for providing a choice for the device preparation of highly sensitive magnetic sensors.
12 July 2021 in IEEE Transactions on Magnetics
Magnetic skyrmions have the potential for a wide range of applications in the next generation of spintronics since they are topologically protected spin configurations in the nanometer length scale. In order to be used in the logic gate, it is necessary to consider how to manipulate magnetic skyrmions. At present, the current drive is the mainstream drive, but this method could consume enormous energy for large Joule heating. In this work, the potential well is introduced to drive skyrmion to reduce energy consumption. The potential well is generated by voltage-controlled magnetic anisotropy (VCMA). We study the possibility of the potential well-induced skyrmion movement within a certain distance, the relevant factors that affect the distance of skyrmion induction, and propose a switched-voltage driving structure within the well-established framework of micromagnetics. Its processes have been theoretically investigated and demonstrated, in which the switched-voltage driving structure can be used to drive skyrmions. Our results provide guidance for the design of low energy consumption voltage-driven skyrmion driving method and a new concept for track memory.