Deploying access and backhaul as wireless links, a.k.a. integrated access and backhaul (IAB), is envisioned as a viable approach to enable flexible and dense networks. Even further, mobile IAB (mIAB) is a candidate solution to enhance the connectivity of multiple user equipment (UE) moving together. In this context, different of other works from the literature, the present work overviews the basis for the deployment of mIAB by presenting: 1) the current status of IAB standardization in the fifth generation (5G) new radio (NR); 2) a new taxonomy for state-of-the-art works regarding fixed IAB and mIAB; 3) an extensive performance analysis of mIAB based on simulation results; and 4) open challenges and potential future prospects of mIAB. Specifically, the proposed taxonomy classifies IAB works according to different perspectives and categorizes mIAB works according to the type of mobile node. For each type of mobile node, the main studied topics are presented. Regarding the performance evaluation, we consider an urban macro scenario where mIAB nodes are deployed in buses in order to improve the passengers’ connection. The results show that, compared to other network architectures, the deployment of mIAB nodes remarkably improves the passengers’ throughput and latency in both downlink and uplink.
A tight interworking between the next generation of wireless cellular networks, the fifth generation (5G), and legacy standards, e.g., long term evaluation (LTE), is being envisioned in order to support a wide range of service requirements. Aiming at addressing the challenge of coordinating resources across different technologies, centralized processing units are being considered. However, they have practical issues, e.g., processing costs and increased signaling overhead. In this context, this work formulates an optimization problem in order to manage resources in a multi radio access technology (RAT) scenario. Its objective is to maximize the minimum user throughput in the system subject to the constraint that for each user, his throughput must be higher than a requirement. One of the differences from previous works is that the users may connect to more than one RAT at the same time, the so-called dual connectivity. The referred problem is nonlinear and hard to solve. However, we get to transform it into a simpler form, a mixed integer linear programming, which can be optimally solved using standard optimization methods. This solution is categorized as a centralized solution. Thus, we propose a distributed framework to overcome the drawbacks of centralized processing. This framework is divided into two parts: a base station (BS) selection procedure (performed by the users) and a resource assignment algorithm (performed by the BSs). Besides, a performance evaluation is conducted, considering fourth generation LTE and 5G new radio parameters.
1 August 2025 in IEEE Communications Standards Magazine
In the fifth generation (5G) wireless cellular networks, millimeter wave spectrum opens room for several potential improvements in throughput, reliability, and latency, among other aspects. However, it also brings challenges, such as a higher influence of blockage which may significantly limit the coverage. In this context, network-controlled repeaters (NCRs) are network nodes with low complexity that represent a technique to overcome coverage problems. In this paper, we present the NCR concept, analyze its performance gains, and explore deployment options. Particularly, we present NCR aspects standardized by the third generation partnership project (3GPP) in Release 18, e.g., NCR architecture, NCR beamforming capability controlled by a gNodeB (gNB) and NCR-gNB side control information exchange. Furthermore, we analyze different NCR deployments in an urban scenario and compare its performance with alternative deployments. As demonstrated, with a proper network planning and beamforming design, NCR is an attractive solution to cover blind spots the gNBs may have.
Heterogeneous networks have been studied as one of the enablers of network densification. These studies have been intensified to overcome some drawbacks related to propagation in millimeter waves (mmWaves), such as severe path and penetration losses. One of the promising heterogeneous nodes is network-controlled repeater (NCR). It was proposed by the 3rd generation partnership project (3GPP) in Release 18 as a candidate solution to enhance network coverage. In this context, this work performs a system level evaluation to analyze the performance improvement that an NCR can cause in its serving cell as well as its interference impact on neighbor cells. Particularly, the results show a considerable improvement on the performance of user equipments (UEs) served by the NCR, while neighbor UEs that receive the NCR signal as interference are negatively impacted, but not enough to suffer from outage.
19 March 2025 in IEEE Transactions on Vehicular Technology
Millimeter wave (mmWave) and sub-THz communications, foreseen for sixth generation (6G), suffer from high propagation losses which affect the network coverage. Another challenge raised by the adoption of high frequency bands is the use of large bandwidths. In order to deal with this last challenge, a common configuration is to divide a large frequency band into multiple smaller subbands. In this context, we consider a mobile network where signaling related to measurements used for radio resource management is transmitted in one subband centered at frequency $f_{c}$ and data transmission is performed at a different frequency $f_{c} + \Delta f$ based on the measurements taken at $f_{c}$. Here, a challenge is that the array radiation pattern can be frequency dependent and, therefore, lead to beam misalignment, called beam squinting. Thus, in this work, we characterize beam squinting in the context of subband operation and propose a solution where the beam patterns to be employed at a given subband can be adjusted/compensated to mitigate beam squinting. For performance evaluation, we present a case study where our compensation method is employed in a network-controlled repeaters (NCRs)-assisted scenario. NCR, which have been standardized in third generation partnership project Release 18, are considered as cost-efficient solutions for coverage extension in the context of mmWave. Specifically, NCRs are radio frequency repeaters with beamforming capability controlled by the network through side control information. Our results show that, without compensation, the perceived signal to interference-plus-noise ratio (SINR) and so the throughput can be substantially decreased due to beam squinting. However, with our proposed compensation method, the system is able to support NCR subband signaling operation with similar performance as if signaling and data were transmitted at the same frequency.
As the number of user equipments increases in fifth generation (5G) and beyond, it is desirable to densify the cellular network with auxiliary nodes assisting the base stations. Examples of these nodes include integrated access and backhaul (IAB) nodes, network-controlled repeaters (NCRs) and reconfigurable intelligent surfaces (RISs). In this context, this work presents a system level overview of these three nodes. Moreover, this work evaluates, through simulations, the impact of network planning aiming at enhancing the performance of a network used to cover an outdoor sport event. We show that, in the considered scenario, in general, IAB nodes provide an improved signal-to-interference-plus-noise ratio and throughput compared to NCRs and RISs. However, there are situations where NCR outperforms IAB due to higher level of interference caused by the latter. Finally, we show that the deployment of these nodes in unmanned aerial vehicles (UAVs) also achieves performance gains due to their aerial mobility. However, UAV constraints related to aerial deployment may prevent these nodes from reaching results as good as those achieved by their stationary deployment.