18 October 2024 in Measurement
1 August 2023 in IEEE Transactions on Instrumentation and Measurement
Wheelset geometric parameters, such as the flange height and wheel diameter, are of great significance for detection to ensure the operational safety of trains. In this paper, an efficient measurement method is presented to achieve the dynamic and noncontact measurement of wheelset geometric parameters using two-dimensional (2D) laser displacement sensors. The mathematical model of the measurement system is established to calculate the wheelset geometric parameters. A standard calibration mechanism is specially designed to calibrate the rotation matrix, horizontal angle, and coordinate origin distance of different sensors. The tread profile mapping method is investigated to decide the feasible scanning range. The error caused by laser dislocation is analyzed, which shows that when the laser dislocation distance and translational distance are less than 1 mm and 16 mm, respectively, the flange height error does not exceed 0.06 mm. Subsequently, static experiments and dynamic field tests are conducted to verify the effectiveness of the system. The results show that the system has high accuracy and can achieve real-time measurement of wheelset geometric parameters. The maximum errors of the flange height and flange width are less than 0.4 mm. The wheel diameter error and wheelset back-back distance error do not exceed 0.8 mm and 0.5 mm, respectively. The measurement results can satisfy the requirements of engineering application and maintenance operations.
22 September 2023 in IEEE Transactions on Instrumentation and Measurement
Wheelset-bearing weaker fault feature extraction from multi-impulsive signals under time-varying speed conditions still presents challenges because of unrelated high amplitude cyclic component interferences and rotational speed fluctuations. To address these issues, a more robust impulsiveness index for assessing fault-related information and a more accurate optimal resonance band (ORB) localization method for weaker fault feature extraction are proposed in the angle domain. On these bases, a fault diagnosis framework for the wheelset-bearings under time-varying speed conditions, named BISOSSRCCOD, is developed. The proposed method is composed of four steps: (1) Obtain the angle domain signals with the aid of speed signals of the wheelset, (2) determine the initial range of the ORB, (3) obtain the accurate range of ORB and center order, and (4) perform envelope analysis of the selected segment for fault detection in the angle domain. The effectiveness of the proposed method is validated using both simulated signals and experimental data. The results reveal that the proposed indicator can resist various interferences and is more suitable for weaker fault feature extraction from multi-impulsive signals. The proposed BISOSSRCCOD method is superior to the ORB location for bearing failure identification under time-varying speed conditions.
14 February 2025 in IEEE Transactions on Instrumentation and Measurement
Generalized demodulation (GD) presents a novel approach for onboard condition monitoring of wheelset bearings under variable speed conditions. The identification of fault-related frequencies, however, still depends on expert experience and manual selection, which renders intelligent onboard condition monitoring impractical. In order to address this issue, an intelligent onboard condition monitoring method based on adaptive GD (AGD) and multidomain feature extraction (MDFE) techniques is developed. The proposed AGD method can map time-varying frequencies to optimal frequency positions, thereby mitigating spectral smear caused by speed fluctuations and providing a robust foundation for high-precision feature extraction. Subsequently, the useful fault information is extracted from the time domain, frequency domain, and demodulation domain by the proposed MDFE. Notably, the features from the demodulation domain are crucial for improving recognition accuracy and have not been reported in other studies. Ultimately, the health condition of the wheelset bearing is assessed using the support vector machines (SVMs). Experiments and field trials are conducted to validate the effectiveness of the proposed method. The results indicate that the features extracted by the MDFE technique not only successfully differentiate the health status of bearings but also accurately identify varying fault severities. Remarkably, the proposed method achieves a 100% accuracy rate in determining the absence of faults, while the accuracy for distinguishing between fault types exceeds 99%. Compared to other common features and traditional classification algorithms, the proposed method demonstrates superior fault classification capability and achieves the highest recognition accuracy.
28 September 2023 in Journal of Dynamic Systems, Measurement, and Control
The fixed-point stopping of high-speed trains in stations is generally accomplished through manual operation in China. This situation often leads to a failure to stop at fixed-point signs and causes a fluctuation in the longitudinal acceleration due to the lack of experience of the drivers. To achieve precise, stable, and automatic stopping, a distributed multiparticle precise stopping control model based on the distributed model predictive control (MPC) algorithm is developed in this paper. A two-level hierarchical control structure for the subcontroller of each vehicle is adopted to bring itself to a controlled stop. In the upper control of subcontroller, the MPC algorithm is designed in turn based on the multiparticle mechanism model of the train. In the lower control of subcontroller, the target input from the upper control is converted and distributed. The controlled object, a comprehensive numerical computing model including the spatial dynamic model of the train and its electropneumatic blending braking model, is established and controlled by the corresponding subcontroller and employed to verify the performance of the controller. The influence of the model control parameters on the stopping performance is discussed, and the optimal combination of control parameters is selected. The proposed control model using the optimization parameters is tested and verified through the comprehensive numerical computing model. The results indicate that the stopping error is 0.0075 m, which is much less than the accuracy requirements for fixed-point stopping. The computing time of each subcontroller in real-time is stable at 0.09 s. The coupler impact force between two adjacent vehicles can also be effectively inhibited and eliminated. Its control performance outperforms a proportional–integral–derivative (PID) algorithm. The proposed precise stopping model and comprehensive numerical computing model provide references for the application and algorithm optimization of automatic train operation technology in high-speed trains.
11 March 2025 in Advanced Theory and Simulations