1 September 2017 in Biofuel Research Journal
Serious environmental concerns regarding the use of fossil-based fuels have raised awareness regarding the necessity of alternative clean fuels and energy carriers. Biodiesel is considered a clean, biodegradable, and non-toxic diesel substitute produced via the transesterification of triglycerides with an alcohol in the presence of a proper catalyst. After initial separation of the by-product (glycerol), the crude biodiesel needs to be purified to meet the standard specifications prior to marketing. The presence of impurities in the biodiesel not only significantly affects its engine performance but also complicates its handling and storage. Therefore, biodiesel purification is an essential step prior to marketing. Biodiesel purification methods can be classified based on the nature of the process into equilibrium-based, affinity-based, membrane-based, reaction-based, and solid-liquid separation processes. The main adverse properties of biodiesel – namely moisture absorption, corrosiveness, and high viscosity – primarily arise from the presence of oxygen. To address these issues, several upgrading techniques have been proposed, among which catalytic (hydro)deoxygenation using conventional hydrotreating catalysts, supported metallic materials, and most recently transition metals in various forms appear promising. Nevertheless, catalyst deactivation (via coking) and/or inadequacy of product yields necessitate further research. This paper provides a comprehensive overview on the techniques and methods used for biodiesel purification and upgrading.
1 April 2019 in Renewable and Sustainable Energy Reviews
24 October 2022 in Energy & Environmental Science
Supercritical fractionation of lignocellulosic biomass enhances the production of lignin-derived hydrocarbons and boosts the digestibility of the cellulose-rich pulp.
27 March 2020 in Green Chemistry
Lignin valorization to chemicals is an important component of creating economically viable biofuels production from lignocellulosic biomass.
11 February 2020 in Sustainable Energy & Fuels
Atmospheric hydrodeoxygenation (HDO) of wheat straw fast pyrolysis vapors was studied as a promising route for the production of renewable liquid transportation fuels. The performance of TiO2-supported Pt (0.5 wt%) and MoO3 (10 wt%) catalysts was compared to an industrial Mo-based catalyst using a bench scale reactor operated at atmospheric pressure and up to high biomass-to-catalyst ratios (B:C). Mass and energy balances were complemented by detailed bio-oil characterization including advanced methods such as GC×GC-ToF/MS or -FID and 13C NMR. At 50 vol% H2, all three HDO catalysts effectively reduced the oxygen content of the bio-oils to ∼7–12 wt% (dry basis) compared to a non-catalytic reference (23 wt% O). MoO3/TiO2 was least efficient in conversion of acids (TAN = 28 mg per KOH), while Pt/TiO2 and MoO3/Al2O3 obtained oils with TAN ∼ 13 mg KOH/g (non-catalytic = 66 mg KOH/g). Compared to the TiO2-supported catalysts, the industrial Mo/Al2O3 catalyst produced higher yields of coke at the expense of condensed bio-oil. MoO3/TiO2 performed similar to Pt/TiO2 in terms of deoxygenation and energy recovery of condensed bio-oil, and by increasing the H2 concentration to 90 vol% the energy recovery of bio-oil increased to 39 and 42% at 8 and 10 wt% O (d.b.), respectively. Pt/TiO2 showed the highest selectivity to aliphatics and the lowest coke yields, e.g. the coke yield at B:C ∼ 8 was only 0.6 wt% of fed biomass. This study demonstrates that by using low-pressures of hydrogen and appropriate HDO catalysts, the quality of bio-oil can be improved without severely compromising its quantity (carbon yield) as observed under catalytic fast pyrolysis conditions.
7 July 2017 in Green Chemistry
Low pressure hydrodeoxygenation of cellulose pyrolysis model compounds over MoO 3 to form hydrocarbons.