1 December 2017 in IEEE Vehicular Technology Magazine
This article provides an overview of the long-term evolution-vehicle (LTE-V) standard supporting sidelink or vehicle-to-vehicle (V2V) communications using LTE's direct interface named PC5 in LTE. We review the physical layer changes introduced under Release 14 for LTE-V, its communication modes 3 and 4, and the LTE-V evolutions under discussion in Release 15 to support fifth-generation (5G) vehicle-to-everything (V2X) communications and autonomous vehicles' applications. Modes 3 and 4 support direct V2V communications but differ on how they allocate the radio resources. Resources are allocated by the cellular network under mode 3. Mode 4 does not require cellular coverage, and vehicles autonomously select their radio resources using a distributed scheduling scheme supported by congestion control mechanisms. Mode 4 is considered the baseline mode and represents an alternative to 802.11p or dedicated shortrange communications (DSRC). In this context, this article also presents a detailed analysis of the performance of LTE-V sidelink mode 4, and proposes a modification to its distributed scheduling.
19 December 2018 in IEEE Transactions on Vehicular Technology
The C-V2X or LTE-V standard has been designed to support V2X (Vehicle to Everything) communications. The standard is an evolution of LTE, and it has been published by the 3GPP in Release 14. This new standard introduces the C-V2X or LTE-V Mode 4 that is specifically designed for V2V communications using the PC5 sidelink interface without any cellular infrastructure support. In Mode 4, vehicles autonomously select and manage their radio resources. Mode 4 is highly relevant since V2V safety applications cannot depend on the availability of infrastructure-based cellular coverage. This paper presents the first analytical models of the communication performance of C-V2X or LTE-V Mode 4. In particular, the paper presents analytical models for the average PDR (Packet Delivery Ratio) as a function of the distance between transmitter and receiver, and for the four different types of transmission errors that can be encountered in C-V2X Mode 4. The models are validated for a wide range of transmission parameters and traffic densities. To this aim, this study compares the results obtained with the analytical models to those obtained with a C-V2X Mode 4 simulator implemented over Veins.
3 July 2020 in IEEE Access
V2X (Vehicle to everything) communications can be currently supported by standards based on IEEE 802.11p (e.g. DSRC or ITS-G5) or LTE-V2X (also known as Cellular V2X or C-V2X) technologies. There has been an intense debate in the community on which technology achieves best performance. However, existing studies do not take into account the variability present in the generation and size of V2X messages. This variability can significantly impact the operation and performance of the Medium Access Control (MAC). This study progresses the state of the art by conducting an in-depth evaluation of both technologies under different message traffic patterns. In particular, we consider aperiodic and periodic messages of constant or variable size based on the standardized ETSI Cooperative Awareness Messages (CAMs). This study considers different scenarios and possible configurations of IEEE 802.11p and LTE-V2X. We demonstrate that IEEE 802.11p can better cope with variations in the size and time interval between messages. We also demonstrate (and characterize) that the LTE-V2X sensing-based semi-persistent scheduling faces certain inefficiencies when transmitting aperiodic messages of variable size. These inefficiencies result in that IEEE 802.11p generally outperforms LTE-V2X when transmitting aperiodic messages of variable size except when the channel load is very low.
2 November 2021 in IEEE Transactions on Vehicular Technology
The critical nature of vehicular communications requires their extensive testing and evaluation. Analytical models can represent an attractive and cost-effective approach for such evaluation if they can adequately model all underlying effects that impact the performance of vehicular communications. Several analytical models have been proposed to date to model vehicular communications based on the IEEE 802.11p (or DSRC) standard. However, existing models normally model in detail the MAC (Medium Access Control), and generally simplify the propagation and interference effects. This reduces their value as an alternative to evaluate the performance of vehicular communications. This paper addresses this gap, and presents new analytical models that accurately model the performance of vehicle-to-vehicle communications based on the IEEE 802.11p standard. The models jointly account for a detailed modeling of the propagation and interference effects, as well as the impact of the hidden terminal problem. The model quantifies the PDR (Packet Delivery Ratio) as a function of the distance between transmitter and receiver. The paper also presents new analytical models to quantify the probability of the four different types of packet errors in IEEE 802.11p. In addition, the paper presents the first analytical model capable to accurately estimate the Channel Busy Ratio (CBR) metric even under high channel load levels. All the analytical models are validated by means of simulation for a wide range of parameters, including traffic densities, packet transmission frequencies, transmission power levels, data rates and packet sizes. An implementation of the models is provided openly to facilitate their use by the community.
9 March 2020 in IEEE Transactions on Vehicular Technology
Most V2X (Vehicle-to-Everything) applications rely on broadcasting awareness messages known as CAM (Cooperative Awareness Messages) in ETSI or BSM (Basic Safety Message) in SAE standards. A large number of studies have been devoted to guarantee their reliable transmission. However, to date, the studies are generally based on simplified data traffic models that generate awareness messages at periodic intervals or with a constant message size. These models do not accurately represent the real generation of CAM messages that follow specific mobility-based rules. Using simplified and unrealistic traffic models can significantly impact the results and validity of the studies, and hence accurate models for the generation of awareness messages are necessary. This paper proposes the first set of models that can realistically generate CAM messages. The models have been created from real traces collected by two car manufacturers in urban, sub-urban and highway test drives. The models are based on mth order Markov sources, and model the size of CAMs and the time interval between CAMs. The models are openly provided to the community and can be easily integrated into any simulator.