Mechatronic, Electrical Energy and Dynamic Systems (MEED), Institute of Mechanics, Materials and Civil Engineering (IMMC), Université Catholique de Louvain (UCLouvain), Ottignies-Louvain-la-Neuve, Belgium
Auto-generated profile, based on publicly available information
Nicolas Verbeek
Mechatronic, Electrical Energy and Dynamic Systems (MEED), Institute of Mechanics, Materials and Civil Engineering (IMMC), Université Catholique de Louvain (UCLouvain), Ottignies-Louvain-la-Neuve, Belgium
Piezoelectric hysteresis is a critical issue that significantly degrades the motion accuracy of piezo-actuated nanopositioners. Such an issue is difficult to be precisely modeled and compensated for, primarily due to its asymmetric, rate, and input amplitude-dependent characteristics. This article proposes a novel method to deal with this challenge. Specifically, a polynomial-based fractional order disturbance model is proposed to accommodate and characterize the complex hysteresis effect. In this model, the rate dependence is captured by a general method of implementing curve fitting in Bode magnitude plot. The inverse model for control purposes is immediately available from the original one. The proposed method does not require expensive computational resources. In fact, this article shows that this controller can be easily implemented in an analog manner, which brings the advantages of high bandwidth and low cost. Extensive modeling and tracking experiments are carried out to demonstrate the effectiveness of the proposed method. It is shown that the piezoelectric hysteresis nonlinearity can be significantly suppressed over a wide bandwidth.
25 August 2020 in IEEE Transactions on Industrial Electronics
Piezoelectric self-sensing is a promising displacement estimation technique that has captured a broad range of attention since its origin. However, one long-standing and critical issue associated with this technique is its unstable static performance. This issue significantly undermines the sensing accuracy and the long-term reliability, which are primary concerns in industrial applications. In this article, we show that this challenging issue can be finally solved. The proposed solution consists of two steps. First, we develop a novel charge sensing circuit that provides an explicit access to observe any disturbance that might impact the static sensing. Second, by introducing cascaded observers, a self-improvement sensing scheme is developed. High accuracy displacement estimate can, thus, be reconstructed by fusing the reference signal, the observed disturbance, and the original sensing signal together. Experimental validations demonstrate the expected stable performance. The root-mean-square sensing errors are well below 1%. The developed self-sensing technique is a competitive solution for nanopositioning applications, also due to its self-contained, immunity to environmental disturbance, and plug-and-play features.
This article presents a novel formulation in hybrid analytic modeling (HAM) for solving 2-D nonlinear magnetic problems. This novel formulation, referred to as the loop formulation, solves the magnetic equivalent circuit (MEC) through Kirchhoff's voltage law, as opposed to the traditional node formulation, which uses Kirchhoff's current law. This allows one to solve the system iteratively using the Newton-Raphson method instead of the fixed-point method, providing a convergence rate up to four times faster. The novel HAM formulation also provides an excellent tradeoff between accuracy and computational time. It offers approximately one order of magnitude lower computation time for the same accuracy compared to finite-element analysis (FEA) on a slotless geometry.