Arunachalam Ramanathan

Arunachalam Ramanathan

Auto-generated profile, based on publicly available information

Arunachalam Ramanathan

University of Georgia

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 November 2024 in Advanced Healthcare Materials
Verified
Journal Article
Open access
YZYuxiang Zhu
Yuxiang Zhu
SGShenghan Guo
Shenghan Guo
DRDharneedar Ravichandran
Dharneedar Ravichandran
ARArunachalam Ramanathan
Arunachalam Ramanathan
MSM. Taylor Sobczak
M. Taylor Sobczak
KENAN SONGKENAN SONG
KENAN SONG
3D printing, also known as additive manufacturing, holds immense potential for rapid prototyping and customized production of functional health‐related devices. With advancements in polymer chemistry and biomedical engineering, polymeric biomaterials have become integral to 3D‐printed biomedical applications. However, there still exists a bottleneck in the compatibility of polymeric biomaterials with different 3D printing methods, as well as intrinsic challenges such as limited printing resolution and rates. Therefore, this review aims to introduce the current state‐of‐the‐art in 3D‐printed functional polymeric health‐related devices. It begins with an overview of the landscape of 3D printing techniques, followed by an examination of commonly used polymeric biomaterials. Subsequently, examples of 3D‐printed biomedical devices are provided and classified into categories such as biosensors, bioactuators, soft robotics, energy storage systems, self‐powered devices, and data science in bioplotting. The emphasis is on exploring the current capabilities of 3D printing in manufacturing polymeric biomaterials into desired geometries that facilitate device functionality and studying the reasons for material choice. Finally, an outlook with challenges and possible improvements in the near future is presented, projecting the contribution of general 3D printing and polymeric biomaterials in the field of healthcare.

27 July 2023 in Small
Verified
Journal Article
Open access
NFNathan Fonseca
Nathan Fonseca
STSri Vaishnavi Thummalapalli
Sri Vaishnavi Thummalapalli
SJSayli Jambhulkar
Sayli Jambhulkar
DRDharneedar Ravichandran
Dharneedar Ravichandran
YZYuxiang Zhu
Yuxiang Zhu
KENAN SONGKENAN SONG
KENAN SONG
Lithium‐ion batteries (LIBs) have significantly impacted the daily lives, finding broad applications in various industries such as consumer electronics, electric vehicles, medical devices, aerospace, and power tools. However, they still face issues (i.e., safety due to dendrite propagation, manufacturing cost, random porosities, and basic & planar geometries) that hinder their widespread applications as the demand for LIBs rapidly increases in all sectors due to their high energy and power density values compared to other batteries. Additive manufacturing (AM) is a promising technique for creating precise and programmable structures in energy storage devices. This review first summarizes light, filament, powder, and jetting‐based 3D printing methods with the status on current trends and limitations for each AM technology. The paper also delves into 3D printing‐enabled electrodes (both anodes and cathodes) and solid‐state electrolytes for LIBs, emphasizing the current state‐of‐the‐art materials, manufacturing methods, and properties/performance. Additionally, the current challenges in the AM for electrochemical energy storage (EES) applications, including limited materials, low processing precision, codesign/comanufacturing concepts for complete battery printing, machine learning (ML)/artificial intelligence (AI) for processing optimization and data analysis, environmental risks, and the potential of 4D printing in advanced battery applications, are also presented.

29 September 2023 in Small
Verified
Journal Article
Open access
SJSayli Jambhulkar
Sayli Jambhulkar
DRDharneedar Ravichandran
Dharneedar Ravichandran
YZYuxiang Zhu
Yuxiang Zhu
VTVarunkumar Thippanna
Varunkumar Thippanna
ARArunachalam Ramanathan
Arunachalam Ramanathan
KENAN SONGKENAN SONG
KENAN SONG
Nanoparticles form long‐range micropatterns via self‐assembly or directed self‐assembly with superior mechanical, electrical, optical, magnetic, chemical, and other functional properties for broad applications, such as structural supports, thermal exchangers, optoelectronics, microelectronics, and robotics. The precisely defined particle assembly at the nanoscale with simultaneously scalable patterning at the microscale is indispensable for enabling functionality and improving the performance of devices. This article provides a comprehensive review of nanoparticle assembly formed primarily via the balance of forces at the nanoscale (e.g., van der Waals, colloidal, capillary, convection, and chemical forces) and nanoparticle‐template interactions (e.g., physical confinement, chemical functionalization, additive layer‐upon‐layer). The review commences with a general overview of nanoparticle self‐assembly, with the state‐of‐the‐art literature review and motivation. It subsequently reviews the recent progress in nanoparticle assembly without the presence of surface templates. Manufacturing techniques for surface template fabrication and their influence on nanoparticle assembly efficiency and effectiveness are then explored. The primary focus is the spatial organization and orientational preference of nanoparticles on non‐templated and pre‐templated surfaces in a controlled manner. Moreover, the article discusses broad applications of micropatterned surfaces, encompassing various fields. Finally, the review concludes with a summary of manufacturing methods, their limitations, and future trends in nanoparticle assembly.

22 July 2025 in Acta Biomaterialia
Verified
Journal Article
Closed access
JHJixin Hou
Jixin Hou
KJKun Jiang
Kun Jiang
ARArunachalam Ramanathan
Arunachalam Ramanathan
AKAbhishek Saji Kumar
Abhishek Saji Kumar
WZWei Zhang
Wei Zhang
XWXianqiao Wang
Xianqiao Wang

13 December 2023 in Journal of Polymer Science
Verified
Journal Article
Open access
ARArunachalam Ramanathan
Arunachalam Ramanathan
VTVarunkumar Thippanna
Varunkumar Thippanna
AKAbhishek Saji Kumar
Abhishek Saji Kumar
BSBarath Sundaravadivelan
Barath Sundaravadivelan
YZYuxiang Zhu
Yuxiang Zhu
KENAN SONGKENAN SONG
KENAN SONG
Composites play progressively significant roles across a spectrum of applications involving high‐performance materials and products within industries such as aerospace, naval, automotive, construction, missiles, and defense technology. Notably, oriented fiber composites have garnered substantial attention due to their advantageous attributes like a high strength‐to‐weight ratio and controlled anisotropy. Nonetheless, challenges persist in uneven fiber alignment, fiber clustering within the matrix material, and constraints on fiber volume, impeding the mass production of oriented fiber‐reinforced composites. In this study, we present a novel approach to 3D printing of uniformly aligned short fiber reinforcement in a composite of heavily loaded carbon and nylon. Capitalizing on the additive manufacturing potential of rapidity and precision, the extrusion process induces carbon fiber (CF) alignments in filaments via shear forces. The 3D‐printed structures that were created displayed impressive potential for customization. They consistently demonstrated improved mechanical and thermal properties when compared to the original nylon structures. Our methodology for producing uniformly dispersed and aligned short fiber reinforcement in polymer composites promises to propel the advancement of design and manufacturing for high‐performance composite materials and components.

23 January 2025 in ACS Applied Materials & Interfaces
Verified
Journal Article
Open access
AKAbhishek Saji Kumar
Abhishek Saji Kumar
RARayane Akoumeh
Rayane Akoumeh
ARArunachalam Ramanathan
Arunachalam Ramanathan
JPJaeWoo Park
JaeWoo Park
VTVarunkumar Thippanna
Varunkumar Thippanna
KENAN SONGKENAN SONG
KENAN SONG
This study introduces a biomimetic approach to 3D printing multilayered hierarchical porous membranes (MHMs) using Direct Ink Writing (DIW) technology. Fabricated through a fast layer-by-layer printing process with varying concentrations of pore-forming agents, the produced MHMs mimic the hierarchical pore structure and filtration capabilities of natural soil systems. As a result, the 3D-printed MHMs achieved an impressive oil rejection rate of 99.02% and demonstrated exceptional reusability, maintaining a flux recovery ratio of 99.48% even after hours of continuous filtration. Moreover, the 3D-printed MHMs exhibit superior hierarchical porous architecture and mechanical integrity compared to traditional flat sheet single-layered membranes. This study presents a significant advancement for scalable 3D printing of customized multilayer membranes with tailored porosity and high-performance filtration properties. The simplicity, versatility, and cost-effectiveness of the presented manufacturing method offer a pathway for advanced design and on-demand membrane production.