13 July 2015 in Energy & Environmental Science
Reactors based on particle suspensions for the capture, conversion, storage, and use of solar energy as H2 are projected to be cost-competitive with fossil fuels. In light of this, this review paper summarizes state-of-the-art particle light absorbers and cocatalysts as suspensions (photocatalysts) that demonstrate visible-light-driven water splitting on the laboratory scale. Also presented are reactor descriptions, theoretical considerations particular to particle suspension reactors, and efficiency and performance characterization metrics. Opportunities for targeted research, analysis, and development of reactor designs are highlighted.
19 June 2018 in Energy & Environmental Science
Several application fields can benefit from solar-hydrogen technologies via specific short-term and long-term pathways.
23 December 2020 in ACS Energy Letters
22 June 2022 in Journal of Physics D: Applied Physics
Renewable fuel generation is essential for a low carbon footprint economy. Thus, over the last five decades, a significant effort has been dedicated towards increasing the performance of solar fuels generating devices. Specifically, the solar to hydrogen efficiency of photoelectrochemical cells has progressed steadily towards its fundamental limit, and the faradaic efficiency towards valuable products in CO2 reduction systems has increased dramatically. However, there are still numerous scientific and engineering challenges that must be overcame in order to turn solar fuels into a viable technology. At the electrode and device level, the conversion efficiency, stability and products selectivity must be increased significantly. Meanwhile, these performance metrics must be maintained when scaling up devices and systems while maintaining an acceptable cost and carbon footprint. This roadmap surveys different aspects of this endeavor: system benchmarking, device scaling, various approaches for photoelectrodes design, materials discovery, and catalysis. Each of the sections in the roadmap focuses on a single topic, discussing the state of the art, the key challenges and advancements required to meet them. The roadmap can be used as a guide for researchers and funding agencies highlighting the most pressing needs of the field.
2 March 2016 in Journal of Materials Chemistry A
Heavy metal toxicity and device instability are prominent limitations in the push for commercialization of photovoltaics based on low-cost, solution-processed materials. In this study, a hybrid organic–inorganic material containing trivalent bismuth and dicationic 1,6-hexanediammonium was used as the photoactive layer in solution-processed photovoltaics. These proof-of-concept photovoltaics demonstrated a stable open-circuit photovoltage of 384 ± 12 mV and steady-state short-circuit photocurrent density of 0.101 ± 0.020 mA cm−2. In comparison to the widely studied lead-halide-based perovskites, the bismuth-based materials had superior coverage on mesoporous TiO2 layers as determined by scanning electron microscopy. Moreover, thermal stability tests demonstrated that these bismuth-based materials were more stable at higher temperatures than comparable lead-based materials.
25 October 2017 in ACS Energy Letters