Solar cells (SCs) are of considerable current research interest because of their potential as a clean alternative to fossil fuels. Researchers across the globe are developing novel polymeric materials with enhanced power conversion efficiency (PCE). Conjugated poly-ynes and poly(metalla-ynes) incorporating late transition metals and thiophene-based spacers have played a very important role in this strategic area of materials research. The performance of the SCs can be optimized by varying the conjugated spacers and/or the metal ions along the polymer backbone. Therefore, an analysis of structure-photovoltaic property relationships in poly-ynes and poly(metalla-ynes) is desirable as a guide for the development of new functional materials for use in SCs. Keeping the importance of this strategic topic in mind, herein we present a brief review on conjugated poly-ynes and poly(metalla-ynes) incorporating thiophene-based spacers that have potential SC applications. Attempts have been made to correlate the photovoltaic performance of the SCs to the chemical structure of thiophene-incorporated poly-ynes and poly(metalla-ynes). The performance of SCs is also strongly influenced by other factors such as morphology and device structure
Using an environmentally benign choline chloride based deep eutectic solvent (DES), chromium (Cr) and chromium–single walled carbon nanotube (Cr–SWCNT) composite coatings on copper (Cu) substrate were developed by pulse electrodeposition (PED) method. The cyclic voltammetry studies of Cr3+ choline chloride based DES system showed that the reduction of Cr3+ to Cr0 occurs via two-step process. The effect of SWCNTs on the thickness, current efficiency and hardness of the deposits were examined. The SWCNTs improved the hardness and corrosion resistance properties of composite coating. Crystallographic phases, structural morphology, topography and corrosion resistance were studied using X-ray diffraction (XRD), scanning electron microscopy (SEM), field emission (FE)-SEM, atomic force microscopy (AFM) and potentiodynamic polarisation techniques respectively. Structural morphological data revealed uniform distribution of SWCNTs in the chromium metal matrix.
Nickel–titanium carbide nanocomposite coating was electrodeposited on mild steel substrate using Watts nickel bath, and the extent of TiC incorporation into nickel matrix was studied with respect to various TiC particle concentrations 2–15 g L−1, bath pH 2–5 at 30–60°C and current density 2–10 Adm−2. The volume percentage of TiC particle incorporation into the nickel matrix was found, and surface morphology, crystal size, phase of the nanocomposite, corrosion behaviour and microhardness of the Ni–TiC composite deposits were studied. It was found that the incorporation of TiC particles into the nickel matrix increased with increasing concentration of TiC particle and modified the surface morphology and orientation of the Ni–TiC deposit. A content of 10·8 vol.-%TiC particle incorporated Ni–TiC nanocomposite deposit was obtained with 8 g L−1 TiC in the nickel bath at 8 Adm−2, pH 4, 50°C and showed better corrosion resistance and higher hardness than nickel.