Noble metal-free counter electrodes using a co-catalytic loading of MoS2 nanosheets onto Cu2ZnSnS4 microspheres are investigated by means of CuInS2–CdSe quantum dot (QD) co-sensitized solar cells fabricated with single crystalline ZnO nanowires. An ex situ electrophoretic deposition route is employed to deposit QDs onto ZnO nanowires that are epitaxially grown on ZnO seed layered FTO substrates. Hydrothermally grown ZnO nanowires have also established an excellent stability against the bias conditions applied to fabricate the photoanodes of the devices. The superior photovoltaic performance of CuInS2–CdSe QD co-sensitized cells is compared with that of bare CuInS2 and CdSe counterparts, using current–voltage and incident photon-to-current conversion efficiency measurements. The present study also demonstrates an enhanced performance of the devices fabricated with 1.0 wt% of MoS2 loaded Cu2ZnSnS4 based counter electrodes in contrast to bare Cu2ZnSnS4. Hydrothermal loading of MoS2 onto Cu2ZnSnS4 generates an electrically interconnected network of Cu2ZnSnS4 microspheres, leading to facile charge transport in the counter electrode of the devices. MoS2 in its nanosheet form acts as an electrical bridge that interlinks the Cu2ZnSnS4 microspheres. Additionally, a favorable band energy alignment of Cu2ZnSnS4 and MoS2 stimulates the charge transfer dynamics in the Cu2ZnSnS4–MoS2 composite. Electron transport and recombination kinetics of the devices are measured using electrochemical impedance spectroscopy.
Favourable charge recombination kinetics are achieved to enhance solar hydrogen production utilizing reduced graphene oxide coated onto noble metal free CuBi2O4.
Finding the material characteristics satisfying most of the photovoltaic conditions is difficult. In contrast, utilization of foreign materials that can contribute to light harvesting and charge transfers in the devices is now desirable/thought-provoking. Herein, a binary hybrid photoanode utilizing nano-amassed micron-sized mesoporous zinc oxide hollow spheres (meso-ZnO HS) in conjunction with SnO2 nanoparticles (NPs), i.e., SnO2 NP_ZnO HS (for an optimized weight ratio (8:2)), displayed a nearly ∼4-fold increase in the efficiency (η) compared to that of bare SnO2 nanoparticle device. Enhanced device efficacy in the composite photoanode-based device can be accredited to the dual function of nano-amassed meso-ZnO HS. Nano-amassed micron-sized ZnO HS embedded in the photoanode can increase the light-harnessing capability without sacrificing the surface area as well as optical confinement of light by multiple reflections within its cavity and enhanced light-scattering effects. Electrochemical impedance spectroscopy analysis revealed an extended lifetime of electron (τe) and a higher value of Rct2 at the working electrode/dye/redox mediator interface, indicating a minimum photoinduced electron interception. The open-circuit voltage decay reveals a slower recombination kinetics of photogenerated electrons, supporting our claim that the nano-ammased meso-ZnO HS can serve as an energy barrier to the photoinjected electrons to retard the back-transfer to the electrolyte. Moreover, the improvement in the fill factors of the composite-based devices is endorsed to the facile penetration of the electrolyte through the pores of nano-amassed meso-ZnO HS, which increases the regeneration probability of oxidized dyes.
16 June 2017 in ACS Sustainable Chemistry & Engineering